开云体育

I had a similar issue with RPi OS update. When I enable Hot Spot on reboot the Pi no longer connects to my WiFi. I figured I would leave it disabled until I am actually out in the field then it

Did you install the hotspot itself? You need the actual hotspot script and hotspot tools. You could still use build-a-pi and only install those two things. -- 73, de KM4ACK YouTube (

Installed a fresh new copy of buster on the pi4 2gb version , every-time I install hotspot tools V2 and try to enable it , it kills my wifi and will not let me enable it also the HS never enables. On

The set deirwolf command worked. I had to hunt the videos after I updated the new SD card. The deirwolf path to sound work for packet. I sent a Winlink message via Winlink (Pat) and APRS from

Don, You probably saw this over on Patreon but just in case, see this page ( http://simp.ly/publish/FKp8Rz ) if you are still having issues. It's now as easy as pushing a button to fix. -- 73, de

Mine is on a usb 24 inch extension hanging in a window at all times. I hang it in the same window plugged into a 5w wall charger for an iPhone and it acquires signal just fine. I was reading the gps

This sounds like you are losing your connection due to being indoors and the GPS can't get a clear view of the sky. Does this happen if the pi/gps is outside? -- 73, de KM4ACK YouTube (

Not sure which model specifically I have, I purchased through the link mentioned in the video : DIYmall VK-172 I have noticed that it will occasionally lose connection to satellites as well. If I run

Jason KG7RQK In terminal C PORT ve7ass-7. I'll try it in the morning. Thank You. 73 *Don Poaps* *New Westminster, BC* *VA7DGP DATA* *VA7QU VOICE* *Winlink: va7qu@...

direwolf -t -p 0 Jason King KG7RQK

I know the terminal can be used but I'm at a loss to get it going. We have Packet BBS all around the World. The old fashion Packet station the old-timers used to use. c deirwolf -p -t 0 ve7ass-7 etc

David, If you are running Pat Menu 2, check out this second post in this thread. (

For those having packet/ardop modem issues and running Pat Menu 2, I have added a new feature that will correct the settings for the packet & ARDOP modems. See this page for instruction

KM4ACK, wonderful advice you offered earlier. Paid attention this past weekend and found that while the Pi was changing the frequency correctly, it wasn't putting it into Data mode. After getting into

I have 2 12v fans cooling my pi, obviously they take power direct from 12v source not the pi. I want to turn them on/off with an external relay controlled by a gpio pin, as this is a battery powered

Glad that worked out. It may change on you in the future. I found mine will be different depending on if I have the sound card plug in or not during boot. I am working on a "push button" fix that

Yup! That did the trick! It was looking for the new card 2. I changed the patmenu config settings and she came back to life! You're awesome. thank you so very much. I? look forward to the version

David, I haven't had a chance to play with the new OS much. I do know that it is causing issues with the packet modem because of the sound card numbering. I discussed it in this post (

Hello, Since my last Raspbian update to the recent May 2020 "OS" version, ARDOP GUI will not communicate to the radio. I've tried multiple radios and other apps as well. None of the radios will

It seems as though the latest Buster release (May 2020) is assigning Card 2 to the USB sound card that we all love to use. Previous to this release, it has always assigned Card 1 to the USB sound