开云体育

Jeff, I did not have the tuner attached. But also I discovered that I had menu #85 set to Tuner, if I set #85 to Off, then I'm able to change #20. Thanks for your reply, I just bought the FT857D and

If flrig works point direwolf to flrig for PTT? PTT RIG 2 localhost:4532

I've been beating my head against the wall for close to a month now trying to get ANY Direwolf and YACC or XASTIR combo to build a digipeater, Igate combo. I have an FT-817nd, RPi 3, Yaesu CAT cable

Hi, I just Build from cero a new SD for a Raspberry Pi 4B, with Raspberry Pi OS (Legacy) with desktop / Release date: December 5th 2023 / System: 32-bit / Kernel version: 6.1 / Debian version: 11

Do you have a tuner attached to the Rig?

When setting up the 857 for digital use for FLRIG, I've encountered an issue when trying to change menu # 20 CAT/LIN/TUN.? Mine is set to TUN and it will not change; the only way that I have found to

Thanks Kelly. I ran the sudo apt-get install -y ?libmotif-dev and was then able to install xastir. Larrie AF7NU

from the man page *if_running (process)* if PROCESS is running, display everything $if_running and the matching $endif. This uses the ''pidof'' command, so the -x switch is also supported.

little feedback for each of you on your linux-fu: spooby@K4SPB-DRAWS:~ $ sudo systemctl status bpq ● bpq.service - BPQ Loaded: loaded (/lib/systemd/system/bpq.service; enabled; vendor prese> Active:

Either roll back to “x windows” and don’t use Wayland for a windows manager conky is a 3rd party tool which is outside of the build a pi k

Kelly, I'm not sure what Xorg is.? When you say Standby, as in wait for the next release of Build a PI?

Conky development and functionality of Wayland has been making a little noise lately; so best advice is roll back to Xorg or standby k

haha, well check line 6 on patmenu2/FA-functions k

Just installed Build a Pi.? The first noticeable problem is that the conky display rectangle is blank and totally dark.? I know the gps is functioning as I checked that through terminal and all gps

Yes, with the exception that it either doesn't get saved, or the Pat client isn't picking up the aliases. You mentioned previously that you don't use pat. In spite of that you have been a great help!

Is this working Open Pat Menu->Find Winlink Gateways->Search for gateway. Set your search criteria. Once the list is populated, highlight one of the stations and click "Add Alias" I don’t use PAT

Thanks Kelly for the reply. I took your second suggestion: "you could also set a bash string into the app for $XDG_CONFIG_HOME="~/.config" which would get any others missed." In the patmenu file this

patmenu2/patmenu line 47 patmenu2/manage-pat-functions line 8 you could also set a bash string into the app for $XDG_CONFIG_HOME="~/.config" which would get any others missed. k

I have found another issue with Pat winlink, and it also appears to be GPS related. When I try to search for gateways. the distance and azimuth columns are missing (see attachment) I am guessing that

I thought it might be a good idea to summarize this thread with regard to no GPS in conky and no GPS in Pat. Turns out these are two separate issues and I will address them both separately: First