开云体育

So I tried to reinstall the drivers and it’s telling me that permission is denied.

There were many updates available after the initial install and I did run all those. Not sure if the kernel was updated in that or not. I will reinstall the drivers and see what happens. Thank you for

Interesting... Well let's compare platforms. I am running a PI 4 with Bookworm 32 bit installed. What are you running? -- Mike WB8ERJ Geeze! What is he up to now? https://mikestechblog.com

here is a bap for the driver code k

Maybe you have much better eyesight than i do... hopefully this will show that i am not Crazy and i know what i am talking about. Thank you.

Actually it is, it has been renamed 73linux. See attached. -- Mike WB8ERJ Geeze! What is he up to now? https://mikestechblog.com

Did you by chance update the linux kernel?? Once the WiFi was working any updates would have become available.? If the kernel is updated you must reinstall the drivers. This has happened to me a

After installing mint and the wifi drivers on the Evolve III I was able to connect to my wifi but after just a little while it dropped out and I can no longer see any wifi networks. Any ideas on what

Hi Vic. Again, sorry for the super-delayed reply. The editing process is very simple - sudo nano /etc/chrony/chrony.conf opens the file, you use the arrow keys to navigate down to the line you want to

Nice, you can also use the build in functions of the OS now. k

Thanks for your reply.. but Let me reiterate... its now called 73Linux... and IT IS NO LONGER THERE...

Presently I am using 73linux on a temporary basis on a separate SD card. If I remember correctly, its the same as in BAP. Go to the menu and select HAM RADIO then BUILD A PI then UPDATE TOOL. This

but since its already installed, why cant i find the folder to update apps? that was never the case before....

Same, however if you do a google search for 73linux, it provides a link to KM4ACK's 73linux build. The link from there is good. -- Mike WB8ERJ Geeze! What is he up to now? https://mikestechblog.com

i can no longer find the 73linux folder on the pi? did something happened where it was deleted? how do u now update, add or remove apps from this build?

which section installs winlink? because PAT just does NOT work for me right now. i was able to get Vara latest edition to run on the PI... but last two weeks the PAT software just does not get

I couldn't wait for bookworm support, so I cobbled together this method, if it helps. You can run this from cron every now and then, with an initial delay. -craig KM6LYW

Typically, SignaLink pushes PTT when it detects audio. There is no CAT control for the 2980 so Hamlib isn't in the picture at all. I have a 2980 with a Digirig...it uses RTS for PTT.

I was watching your video on YT.? I get the feeling there were some set up or config that occurred before that video.? I have the ft2980, Signalink, and a Pi 4 hooked up and ready to go.? I assume

FYI project code was updated https://www.raspberryconnect.com/projects/65-raspberrypi-hotspot-accesspoints/203-automated-switching-accesspoint-wifi-network k