开云体育

Typically, SignaLink pushes PTT when it detects audio. There is no CAT control for the 2980 so Hamlib isn't in the picture at all. I have a 2980 with a Digirig...it uses RTS for PTT.

I was watching your video on YT.? I get the feeling there were some set up or config that occurred before that video.? I have the ft2980, Signalink, and a Pi 4 hooked up and ready to go.? I assume

FYI project code was updated https://www.raspberryconnect.com/projects/65-raspberrypi-hotspot-accesspoints/203-automated-switching-accesspoint-wifi-network k

Thank you to all.? It helps much.? I found yesterday that the OPiZ3, without an RTC, after 4 hours, was 50 minutes behind, so an RTC is a must for JS8Call, FT8, FT4, and similar precise timing WSJTX

It was indeed a power issue. I disconnected a reconnected the multiple connectors between my battery and radio. I think the one that felt flaky was the multi-pin connector gong to the radio. When I

Depending on what code was loaded, do you have a “update vara” in your pi’s “start menu” you may need to manually install/update k

Glad it's working for you. There was an issue with /dev/serial/by-id that I thought had been resolved. You might want to check out this video https://youtu.be/UNGrYuZdwXk -- 73, de KM4ACK YouTube (

When trying to install VARA updates i get, "An error occurred while loading the archive". Can anyone direct me on how to fix th

Thanks that worked! 73

Yes I think so. Then I changed the language back to english and run 73 Linux again. I had to remove the folder 73Linux first. Everything looked good but I had seen it had not installed wsjtx although

Mint also has a true Debian-based version called LMDE, so you don’t have to use the Ubuntu-based version. Gerry Curry 546 Cedar Lake Rd Cedar Lake, NS, B5A 5L8 phone (902) 307-1504

Should work fine in most any Linux with apt/deb k

I'm running Debian 12 Xfce on old, lightweight x64 netbooks for simultaneous flrig, fldigi, and JS8Call.? No 73Linux and little other software, but I'm pleased with performance.? The lightweight

Interesting, and unexpected. to be clear the git clone was successful and you ran 73.sh and it did stuff and the errors happen? k

Hi The language of the desktop must be English! I had the same problem with a German desktop Vy vy 73 de Klaus, DC2JR Von meinem iPhone gesendet Am 04.01.2024 um 09:48 schrieb nl13286@...:

Never mind. I watched a different video and it hit me that the '-p' on direwolf is what displays the /dev/pts/1. It still does not show in the by-id dir but it's working. Thanks for replying Doug

So that seems likely, but i am receiving packets in direwolf. So it seems it sees the sound card. Signallink is powered on and I have tried rebooting.

I installed Linux Mint 21.2 64bit on an old laptop and tried to install 73 Linux on it. Now i get an empty screen with no apps to choose from. In the terminal something about rule 38. too many

So I went back to Hamlib 4.4, compilation / link worked, but then other stuff wouldn't work, like rigctld getting "undefined symbol" during start. Went back to Hamlib 4.5, everything's working again.

Hi, I have been successfully running flrig and WSJT-X. Since I did not install fldigi from the beginning, I tried to install it today via PAP after the fact, but compilation fails: make[2]: Entering