开云体育

Just go with 3.03.

Hi. If I am starting out fresh. Do it need to install 3.02 first, then update to 3.03 keep up the great work cheers Greg

Ronnie, The BAP from at least the 3.02 version will automatically update itself. Just run it. You do not need to get a new Operating system image. Bob

Yes I have installed script but I am not sure that it is in the proper order or complete. I have worked at trying to understand the proper order for the scripts. Is this this script complete as of now

Jason,? When you were creating BAP 3.0, you mentioned removing the RTC, with more info to follow.? Can you update us on why you chose to remove the RTC? Thanks, N4DPH PS: I'm really learning a lot

Ronnie, Have you already installed the Build A Pi script? ?IF not go over to Jason's YouTube channel and watch his video. bob

As I am new to Build a Pi. Can I copy this to my Pi, or do I need a new sd card to put it on? I hace a Pi 3b+ running Conky running but my? ? rtc? will not show? the 68 on setup. the rtc is pluged

I reinstalled BAP from scratch on a new copy of Raspberry Pi OS, and it worked.? I suspect that something either changed or was not installed properly to begin with.? My suggestion is that if you

Jason, Thank you for all the hard work! ?This makes setting up a Pi for Ham Radio so much simpler. 73 KE9A

Jay, I’m using the HiFiBerry case and there’s room for the DockerPi power board and the RTC clock on the GPIO. I think it’s a pretty nice case for the price. 73 de AG7TX David Thompson, AG7TX

Jason, Does the case you list work with the DockerPi and the RTC? Combined, they’re too tall for my current case and the only extra tall case I’ve found is $50! I’d rather wrap the whole works

Morning Jason, Thanks for the note. I had watched your video and that is what inspired the testing. I already had the GPS receiver in-house and was wondering whether use of a USB3 port with a USB2

The GPIO on the Rpi4 is the same as that of the RPi3. I use the same RTC's on both boards. -- 73 de N5RKE

I was in the marine electronics business at the arrival of consumer GPS. I don’t recall anything getting a fix from a cold start in a new location so fast.

Jason, I was recently able to purchase three IC-718 rigs for a reasonable price. That gives me four sitting as back up. I have the cables so one can be hooked to the Build A Pi (and it works). I am

The stable version (3.0.3) of build a pi is out. Provided you are running 3.0.2, upgrading should be as easy as running build a pi from the main menu. This version add compatibility for more GPS units

It is the USB 3 port that is giving you the issue. I discovered this during this past field day. I have tested with multiple USB 3 thumb drives/adapters and all have produced the same results. I go

Mike, Here's a list of accessories including the RTC that I have tested. https://app.simplenote.com/publish/4W4h4y -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

Don, That’s an interesting unit. I might have to check one of those out. David Thompson, AG7TX Jack of All Trades Master of None dbthompson@...

FWIW, I just hooked up one of these for the first time. Amazingly fast fix. BN-80U Dual USB GPS GLONASS GNSS Receiver with USB Level 5.0V Supply Voltage 2M Length for Laptop PC Car Marine Navigation