¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. KM4ACK-Pi
  2. Messages
Expanded Topics Messages Polls
Date
Re: BAP Update / PAT

Jerry Rector
 

Jason -

I had a similar problem to Mike's on the BAP 64-bit system here
after the attempt to upgrade PAT.? (32-bit system upgrade ran fine).

Your fix, as outlined here, fixed the 64-bit upgrade problem.

Thanks for all your efforts....

73 de Jerry - K4OAM

On Thu, Sep 22, 2022 at 12:08 PM km4ack <jason.oleham@...> wrote:
I am not really sure what is causing the issue. Something could have changed in the build process for 64bit OS that I am not aware of. Let's see if it will install manually. Run the following commands, one at a time:

cd ~/Downloads
wget
sudo dpkg -i pat_0.13.1_linux_arm64.deb
rm pat_0.13.1_linux_arm64.deb
--
73, de KM4ACK
|
|

Re: LOTW

 
Edited

Are we talking about TQSL here? if so, it works for me on my Pi4 that set up with BAP.
Re: BAP Update / PAT

 

Jason,

That reinstall of PAT did the job.? Thanks for the time

Mike
AMRRON CORPS
Re: HT keying with Digirig

 

¿ªÔÆÌåÓý

Jason:

I tried all of that. Am I supposed to see the 4 dials while running the Vara modem ? If so, my installation is faulty. If it¡¯s supposed to run in the background, we need a method to change settings that would ordinarily be on that drop menu on the dial window.

I can¡¯t seem to get to it, no way, no how. And I¡¯m stuck without a PTT setting for the Digirig. If I were to change interfaces, I would still need to adjust those settings. I just need to get to them.

73, Jamie
WB4YDL


On Sep 22, 2022, at 10:11 AM, km4ack <jason.oleham@...> wrote:

?Try using Pat Menu->Start/Stop Modems->Start VARA FM Modem (BETA)

--
73, de KM4ACK
|
|

Re: Linux Help

 

Don't forget, although it does have an equivalent to the Pi3 CPU, it only has half the RAM, which might have issues with running multiple packages at the same time for you. For most 'single purpose' setups (Single app) it works decently, but if it needs to enable SWAP, it really slows down a lot.

Kevin -- KD9EFV -- EM78dh
Re: Linux Help

 

/g/cq-linux

Bruce's script didn't load Pat even though?Build a Pi update said it was loaded and redid it now Conky says pat is active. Flrig running for Xiegu G90. loads but radio will not qsy. Pat menu says rig:yes

back to researching. I'll be glad when I get my Pi Zero 2 w.

later


Don Poaps
New Westminster, BC
VA7DGP DATA
VA7QU ? VOICE


Winlink: va7qu@...
Subject://wl2k ? ? ? ? ?

ALLSTAR ?530780
Hamshack Hotline
5971
Mid-Island Phone Mesh
2210
2232

? ? ? ? ? ? ? ? ? ?


On Thu, Sep 22, 2022 at 8:11 AM km4ack <jason.oleham@...> wrote:
Sound good Don. Can you post a link to the forum for CQ Linux please?

--
73, de KM4ACK
|
|

Re: Linux Help

 

Sound good Don. Can you post a link to the forum for CQ Linux please?

--
73, de KM4ACK
|
|

Re: HT keying with Digirig

 

Try using Pat Menu->Start/Stop Modems->Start VARA FM Modem (BETA)

--
73, de KM4ACK
|
|

Re: BAP Update / PAT

 

I am not really sure what is causing the issue. Something could have changed in the build process for 64bit OS that I am not aware of. Let's see if it will install manually. Run the following commands, one at a time:

cd ~/Downloads
wget https://github.com/la5nta/pat/releases/download/v0.13.1/pat_0.13.1_linux_arm64.deb
sudo dpkg -i pat_0.13.1_linux_arm64.deb
rm pat_0.13.1_linux_arm64.deb
--
73, de KM4ACK
|
|

pi install #rpi

 

Been trying to get build a pi on my pi. But seem to encounter this problem.

Any idea what it could be? Using the 4Gb Pi 4 and had this happen once so gave up and now trying again to see if I can get all packages working. Tried the update workaround and patch-menu as that worked before but it does not work this time.



Do you know what is causing this?

Will
2M0WHN

2022-09-22-153818_1920x1080_scrot.png

Re: BAP on Pi Zero W2?

 

¿ªÔÆÌåÓý

The RPi Zero W2 is based on the same CPU as the RPi 3B+ (quad-core, full-speed, reduced memory).

It should run about as well as it would on an RPi 3B+.



Ken, N2VIP

On Sep 21, 2022, at 18:29, Wheez (KI7POL) <eric.wheez@...> wrote:

Hey there. The short?answer is it might be possible but you¡¯d have to do most of it by hand by yourself. And it might be super slow or unusable - I haven¡¯t tested it yet. Others might know?

raspberry-pi-4-4y23k3oe.png

Re: BAP on Pi Zero W2?

 

Hey there. The short?answer is it might be possible but you¡¯d have to do most of it by hand by yourself. And it might be super slow or unusable - I haven¡¯t tested it yet. Others might know?

The long answer is, box86 (which runs VARA on Raspberry Pi¡¯s) does work on Pi Zero 2W, but might not be able to use ¡°dynarec¡± on the Zero 2W (which gives box86 its speed over other emulators). The Zero 2W might also need to be configured to use a custom-compiled kernel with a kernel memory split that works with Wine, although I also haven¡¯t scouted that out yet to know for sure. There are some more instructions on the box86 website if you want to give it?a try. I don¡¯t have any plans to get a Zero 2W to test with but it would be a nice addition to the Winelink script if somebody wanted to make a pull request with code to make it work)

73, de KI7POL?

On Wed, Sep 21, 2022 at 11:57 AM Charles Jessee <cbjesseeNH@...> wrote:
I have my Icom IC-705 attached to a 3D printed DigiPi Dock??As DigiPi doesn¡¯t support VARA, I might like to try using the Pi Zero W2 with BAP if that¡¯s an option. Is it?

Mostly just for Winlink VARA.

There a million Pi(0) threads so sorry to add another one!

BRET/N4SRN

Re: BAP Update / PAT

 

Jason,

just returned from travel, tried what you suggested, no luck. ?Similar, slightly different terminal results. ?I noticed PAT became active during the install (via conky).?

here is screenshot. ?

Re: ARDOP/piardopc locks up during transmit **SOLVED**

 

I'm usually able to connect but get lot of this:

[CorrectRawDataWithRS] RS says ok but CRC still bad

[DecodeFrame] Frame: 4FSK.500.100S.E Decode FAIL,? ?Constellation Quality= 51

My guess is that the modem is not able to decode the reply. PAT does a lot of retries and it usually eventually works.? Is this par for the course?

BAP on Pi Zero W2?

 

I have my Icom IC-705 attached to a 3D printed DigiPi Dock??As DigiPi doesn¡¯t support VARA, I might like to try using the Pi Zero W2 with BAP if that¡¯s an option. Is it?

Mostly just for Winlink VARA.

There a million Pi(0) threads so sorry to add another one!

BRET/N4SRN

Re: Custom Templates and Forms in Pat Winlink #pat

 

¿ªÔÆÌåÓý

Thanks!

Get

Re: HT keying with Digirig

 

¿ªÔÆÌåÓý

?But how do you get Vara FM to show up ? When the Vara FM modem is activated, I get an hourglass and then Chromium PAT inbox and that¡¯s it. I don¡¯t see the 4 dials as I would in Windows. If I just click Vara FM in the menu, I just get the hourglass and nothing else. If I click it again, it will tell me that the modem is already running - I don¡¯t SEE anything.?

I haven¡¯t clicked on Vara HF or just plain Vara, so maybe I need to explore this a bit deeper. It shouldn¡¯t be this hard to setup. There¡¯s an icon for Vara sound card setup, but it will only let you set the sound card, not anything else.

73, Jamie
WB4YDL


On Sep 21, 2022, at 6:51 AM, km4ack <jason.oleham@...> wrote:

?I don't have my Pi in front of me that I configured VaraFM and the Digirig with but if I remember correctly I had to play with the PTT settings in VaraFM under the Settings->PTT. Seems like I used COM port 1 and put a check by the RTS option.
--
73, de KM4ACK
|
|

Re: Linux Help

 

I've emailed Bruce and posted on CQ-Linux forum. I'm still waiting for PI Zero 2W to make it appearance.

73

Don Poaps
New Westminster, BC
VA7DGP DATA
VA7QU ? VOICE


Winlink: va7qu@...
Subject://wl2k ? ? ? ? ?

ALLSTAR ?530780
Hamshack Hotline
5971
Mid-Island Phone Mesh
2210
2232

? ? ? ? ? ? ? ? ? ?


On Wed, Sep 21, 2022 at 4:54 AM km4ack <jason.oleham@...> wrote:
I don't have control over that GitHub and I haven't personally played with the build. Try posting an issue ticket I don't think they have a forum setup yet for folks that need help.
--
73, de KM4ACK
|
|

Re: DigiRig not working on Build-a-Pi #digirig #ft817 #flrig

 

Glad you got it figured out. Out of curiosity, did you install the GPS software with Build a Pi? If so, it should have set the USBAUTO to false by default. If it didn't, I need to look into it and figure out why not.
--
73, de KM4ACK
|
|

Re: Linux Help

 

I don't have control over that GitHub and I haven't personally played with the build. Try posting an issue ticket I don't think they have a forum setup yet for folks that need help.
--
73, de KM4ACK
|
|

4821 - 4840 of 13734