开云体育

Don, I am working on a revision for BAP 3.0.3 that will help operators use GPS devices other than the typical one. ( https://amzn.to/2rxKxiz ) 3.0.3 is in the dev branch now but should push to the

That statement (PTT RIG 2 localhost:4532) points to hamlib. If you run *rigctl -l | head* you will see that we are pointing to rig 2. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar

Outstanding! Glad that document helped out. If anyone else needs help with the 7300, the document can be found in my FAQ ( https://tiny.cc/km4ack-faq ) -- 73, de KM4ACK YouTube (

Jason, your suggestion fixed the “Missing x term” problem, and while diagnosing, I realized Ruby was not installed. I began troubleshooting the missing gridquare on Conky, and figured it out. I

Jason, what is the significance of the port u told grant ant the 4563???Sent from my Galaxy Tab? E

I found your later post *cd ~* *rm -rf ~/pi-build* *git clone https://github.com/km4ack/pi- build.git ( https://github.com/km4ack/pi-build.git ) * worked fine. -- --Bill AA6BD

I tried cd ~/pi-build git pull and got remote: Enumerating objects: 104, done. remote: Counting objects: 100% (104/104), done. remote: Compressing objects: 100% (57/57), done. remote: Total 90 (delta

Jason and the group: Thanks so much for that 7300 note. I had been having trouble with Pies for months where FLRIG would stop recognizing my 7300. I tried reinstalling Hamlib and Flrig, no joy. I must

All, I have "things" running, 32 Bit OS <verified>. How can I check OS ??? I may have been running the 64 Bit OS. RATHER than overclocking, I am using force_turbo=1 all four cores run at 1.5G, full

All, the {UP/DOWN} arrows at the top show: eth0: configured 192.168... (OK) and wlan0: STOPPED. ?? I checked my tablet wifi scan and HotSpot does NOt show... steve

Just a thought, and don't know if this is possible since I am not a linux guru, but I did retire from a career as a systems analyst (I was a process/idea man, and left the implementation to the

Joe I modified it to read /dev/ttyUSB0 from /dev/ttyAMC0. Picking up GPS data now. I've rebooted. The conky info is not showing grid square etc. later Don va7dgp Time: 2020-07-08T14:17:49.000Z

Jason, please scroll up and look at my post about conky. I think you missed it because someone else stepped into my topic and replied with his problem instead of starting his own topic. Thanks

The changelog is in the repo https://github.com/km4ack/pi-build/blob/master/changelog If you are on 3.0.0 or 3.0.1 updating is manual. To update, run: *cd ~/pi-build* *git pull* Should that fail with

If the wifi card is truly off, you should not see the 10.10.10.10 address. If a known SSID is just out of range, you would see the 10.10.10.10 address. This is the hotspot that the pi generates when

Very good, sir. First suggested approach seems to have worked. flrig is now installing.? Will test later.

This is a good thing. It has pushed me out of my comfort zone and forced me to learn new things. That is always good! There was an issue with FLRIG & FLMSG that was fixed in 3.0.1. The latest build is

Wade, Check out this video for the fix for can't show the desktop. https://youtu.be/Uy6xbC0Hiew -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack )

Run BAP ver. 3.0.2 and it wil fix this! 73 de LB9EH Bj?rn

Typing Startx in terminal throws up an error similar to: (==) Using system config directory "/usr/share/X11/xorg.conf.d" (EE) Fatal server error: (EE) parse_vt_settings: Cannot open /dev/tty0