开云体育

Did you install Conky & the GPS software with BAP or is this a manual install? Do you have GPS data when you run "cgps"? Post your conkyrc file. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack )

Thanks Mike. But really wanna get it working with FLRIG allowing me to fast swap between my rigs

She's up and running! Great job Jason! I appreciate your help.

All, I followe the GPS/Conky video and I am still having issues with the gridsquare appearing in conky. I also noticed this while troubleshooting: pi@ko4nwk:~ $ systemctl is-active gpsd inactive

Thank you for this. The logdump file that is created is only capturing an hour or so of activity, and the kern.log appears to overwrite at midnight. How can I capture more logging time with these?

Cool, let’s see if we can solve the issue. With the 705 you must use rig control for PTT. There are several ways to accomplish this but we will use FLRIG in this case. First it is critical that

On my Pi3B my Conky displays shows "No Address" for the Wired IP Address field. If I enable the hotspot, it displays an IP address for the Wireless IP Address field, but still no wired address.

I had the same issue with my FT-857D. For me the fixt was to edit the direwold.conf file and scroll down to the PTT section.. Here is what I added for my FT-857D. Of source your will be different,

Hi there. I own one of the Chinese USDR ~3w HF radios. They can run digital using the Kenwood TS-480 cat controls. I confirmed this on wsjtx today. ?However … under FLRIG there are 2 480s, ?a

Hey Jason, Version is hamlib 4.4 Thu 02 23:46:51 2021 *000 SHA=5f8c4c (most recent ver on Bullseye and BAP) I have tried to connect with and without rigctl and I'm wanting to use APRS (xastir) and

Debugging spurious reboots can be tedious and time-consuming.? Your goal is to find some cookie crumbs that will lead you to the culprit.? Unfortunately, there are many ways to reboot a system. -

Hi Bill Yes, but I think I prefer to wait to get it as an .iso but I may try the upgrade on the disk I have it loaded to, I use a USB3 64GB disk to boot it. It does run about as fast as the internal

Several questions for you as it looks like the issue is with hamlib. Which version do you have installed? Run: *rigctl --version * Do you have FLRIG configured for the 705? Is FLRIG running when you

Has anyone had any luck getting direwolf to connect with the IC-705? I have tried normal config with flrig. I have also deleted the # for PTT RIG 2 localhost:4532. I get errors when I run direwolf

worked like a charm! Thanks Jason

This might help. I use Winkeyer on my BAP all the time. This is how I did it: https://mikestechblog.com/how-to-run-winkeyer-on-a-raspberry-pi-computer/ -- Mike WB8ERJ Geeze! What is he up to now?

Glad it worked for you, Wally. Happy to help. Julian

Anyone tried running it on this Pi? (with the build-a-pi SD card) It appears to run OK but I can't find/access the winkeyer. Using it and the audio board may be useful. I've 'outgrown' using the RSS

I have been trying to get my IC 7100 to make a PAT connection on HF and a packet on VHF. I haven't tried UHF and I don't see why I shouldn't be able to make winlink connections any further. I have

*No crontab for root. * I will ask around some more and let you know what I find thank you.