开云体育

additional info that may help... ? I was having problem with the GPS using an open case. I changed to a metal case and the GPS worked. I had a wired LAN "break" that I fixed... NOW, with the wifi off

I have finished installing Build a pi V3. I have this problem of flrig not finding/recognizing the rig com ports when I set USBAUTO true in gps. But the GPS works. I set USBAUTO to false and i get

Latest observations... I loaded another sd card that I thought had been fine from before changing to the new modem and looked at its wpa_supplicant.conf file. I then edited this card to match the

Sorry, forgot to answer some of your questions in my other post, I have been monitoring WSPR for the past 3 days, no transmitting at all. ?The Pi does not see the GPS. ?I run lsusb and the other

Thanks for ?everyones insight. ?Here is some additional info.. my old Pi running the older build-a-pin setup on a Rpi3b,, the GPS work flawlessly. ?The Pi is in a plastic case connected to the same

That fixed the last of the problems that weren't really problems. JS8Call has a new version as of yesterday (maybe it was today). I really wanted to try my little standalone FT8 rig today but the

Thanks for adding the issue.? When you get to this issue, I will be happy to test. -- --Bill AA6BD

Hmmm...all that looks normal to me. I'm stumped. From what you're describing, it sounds like the Pi is randomly dropping the wireless connection and not reconnecting. I'm not sure why it would be

Kevin, I had a similar issue when I hooked up a USB sata drive to the pi. * Are you using a 3A or better power supply? * Try using the USB 2.0 ports for the GPS and sound card. * Or try a powered hub

trl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1 country=US network={ ssid="CenturyLink9131" psk="" key_mgmt=WPA-PSK } That is the entire file.

New install of Build-a-Pi ver 3 on a raspberry pi 3.? Install proceeded without any difficulties.? However, when I went to Update the Build-a-pi (Pi menu -> Preferences -> Build-a Pi), the Update

I have been having GPS problems, too. RFI "issue" ??? Problem using the "standard" GPS with my stacked (open) RPi. I think the same problem will happen with plastic cases. Not a build-a-pi V3 issue...

Thank you for the fast response.? Works great.

Michael, Sorry to give you some bad ideas but you could add CAT control with out to much work. Just tweak the firmware to use software serial on two of the A0-3 pins or rewire pins 2&3 to get access

So,? I figured I would start a new topic about this rather then adding to an existing.? To put this in context, I am running the following: * Raspberry Pi 4 with 4GB memory * Latest release of

https://github.com/km4ack/pi-build/issues/34 Check out the link above for fix. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter (

I ran the update last night from the YouTube bash command. Took about 2 hours.? I started looking at things today, then tried to run the Build-a-Pi update from the menu under Preferences.? When I

I love VARA, so much so that I paid for the HF version. When I like something I have no problem supporting its development. I would so like to see it ported into Pat! Sure wish the developers could

To reach the logger use 127.0.0.1/log or Pi.ip.address/log if on a network. If connecting to the pi via hotspot, 10.10.10.10/log -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

Trying to run the FD Logger program I've run into a problem. Entering 127.0.0.1 into the browser I get the Jason's emergency email server rather than the logger. It seems I should be able to enter a