Re: No Gridsquare in Conky but cgps gives me good information.
I had the same issue this morning after upgrading to 3.0.8 and I performed the steps in the June 24 reply from Jason about missing gems.? Once I did that it worked!
Thanks,
David N4FGA
|
Okay, you can ignore the previous post.? I had an extra " that was causing my error.? Also, the port 4532 on the address is allowing ARDOP to control transmitting to flrig.
While I did not successfully connect yet, it appears I'm moving in the correct direction.
Thanks for all the guidance!
73 de Jim-K0JNR
|
I feel like I'm getting close.? I made the edits you recommended.? But I get a refused to connect error in Chromium when Pat-Mailbox launches.? Should the address under Hamlib match the ulr for Pat-Mailbox, which for me is 127.0.0.1:5000 or should it match the TCPIP in flrig which is 127.0.0.1:4001? Either way, Pat-Mailbox refused to connect with any of these options.? Below is the latest config with edits.? Thanks in Advance for all the help. 73, de Jim-K0JNR
{
? "mycall": "K0JNR",
? "secure_login_password": "PWD",
? "auxiliary_addresses": [],
? "locator": "EM48ON",
? "service_codes": [
? ? "PUBLIC"
? ],
? "http_addr": "0.0.0.0:5000",
? "motd": [
? ? "Open source Winlink client - getpat.io"
? ],
? "connect_aliases": {
? ? "telnet": "telnet://{mycall}:CMSTelnet@...:8772/wl2k"
? },
? "listen": [],
? "hamlib_rigs": {
? ? "my-rig":{
? ? ?"address":"127.0.0.1:4001",
? ? ?"network": "tcp"
? ? ?}
},
? "ax25": {
? ? "port": "wl2k",
? ? "beacon": {
? ? ? "every": 3600,
? ? ? "message": "Winlink P2P",
? ? ? "destination": "IDENT"
? ? },
? ? "rig": ""my-rig"
? },
? "serial-tnc": {
? ? "path": "/dev/ttyUSB0",
? ? "baudrate": 9600,
? ? "type": "Kenwood"
? },
? "winmor": {
? ? "addr": "localhost:8500",
? ? "inbound_bandwidth": 1600,
? ? "drive_level": 0,
? ? "rig": "",
? ? "ptt_ctrl": false
? },
? "ardop": {
? ? "addr": "localhost:8515",
? ? "arq_bandwidth": {
? ? ? "Forced": false,
? ? ? ? ?"Max": 500
? ? },
? ? "rig": "my-rig",
? ? "ptt_ctrl": true,
? ? "beacon_interval": 0,
? ? "cwid_enabled": true
? },
? "pactor": {
? ? "path": "/dev/ttyUSB0",
? ? "baudrate": 57600,
? ? "rig": "",
? ? "custom_init_script": ""
? },
? "telnet": {
? ? "listen_addr": ":8774",
? ? "password": ""
? },
? "gpsd": {
? ? "enable_http": false,
? ? "use_server_time": false,
? ? "addr": "localhost:2947"
? },
? "schedule": {},
? "version_reporting_disabled": false
}
?
|
Thanks, Jason! That works. Now I just have to find out why it's ignoring Gpredict.
Joe KB6WIJ
|
I **really appreciate everyone's help here.
Looks like there is/was a couple of us IC-705 (7300ish) guys with similar questions at the same time.
I wanted to report that I have now **successfully** completed my FIRST PAT WINLINK connection, so thanks everyone.
Here's the only remaining question I have...
My ALC was really high.
Pi newb here, so not sure where to go to adjust this on the pi???
Thanks!
T.M.
KD9LAI
|
Re: Fixed low voltage warning on my Pi systems with a cable upgrade
Hi All
Many ways to feed the pi.
To get rid of that dreaded lightning bolt and lower power warning (and associated poor performance)?
I feed the one or two Pi¡¯s that seem to do this, with an additional power feed through the USB port
Phil VK2JDL?
|
Re: BAP 3.08 JTDX, GridTracker, JS8Call issues
Matt hope you find the fault. Rf entering usb port/s or psu can cause issues - irratic I had an ussue with a signalink that just freeze up. Rerouted the cables today and hope that sorted out. Only happened when i use 80m js8call on rpi Greetings from the Namib
Pieter Jacobs De v51pj
toggle quoted message
Show quoted text
On 10 Aug 2021, at 4:24 PM, Matt Cenatiempo <kc5ril@...> wrote:
?Greetings Pieter.??
The problem is probably unique to my shack.? I do not believe it is RFI, but am chasing that down today to rule it out.? In every program, different results occur.? Either I get kicked out after a short while, or attempting to transmit, or I get a 'hamlib' error message.? In other instances, I am directed to update radio configuration settings.??
I will go through and update what I can and see if that helps.? I have a clean 3.08 set up on another Pi4.? I will turn that on after lunch to see if the problems are duplicated or not.
wish me luck
de KC5RIL
|
Re: BAP 3.08 JTDX, GridTracker, JS8Call issues
Greetings Pieter.??
The problem is probably unique to my shack.? I do not believe it is RFI, but am chasing that down today to rule it out.? In every program, different results occur.? Either I get kicked out after a short while, or attempting to transmit, or I get a 'hamlib' error message.? In other instances, I am directed to update radio configuration settings.??
I will go through and update what I can and see if that helps.? I have a clean 3.08 set up on another Pi4.? I will turn that on after lunch to see if the problems are duplicated or not.
wish me luck
de KC5RIL
|
Re: Adding solar flux and a index to conky
Jason,
Testing Solar Muf Script. I don't seem to have /usr/bin/convert. Is it part of your rollout or do I use apt install?
|
Super Newbie: autohotspot will not install
Hi all
Just got a new pi and setting it up - my old ones are too old!
I am installing it bit by bit and am currently adding the autohotspot. The setup is now in Downloads and I am running the executable. However, every time I try I get "./autohotspotN-setup: 8: ./autohotspotN-setup: Syntax error: newline unexpected"
Ideas please?
73
2E0KOJ (Mark)
|
You also need to verify that the baud rate is set in the rigctl statement and that it matches what you have set on the radio. I don't have my 817 in front of me but I believe it is called the CAT RATE in the 817 menu. Off the top of my head, so take with a grain of salt:
rigctld -m 1020 -r /dev/ttyUSB0 -s 4800
where -s sets the rate. --
73, de KM4ACK
|
|
|
Hi Jason,
Ran the command, & this is the results:
"cat: /usr/share/applications/hamrs.desktop: No such file or directory"
73, de VA7RYL
|
Re: No Gridsquare in Conky but cgps gives me good information.
toggle quoted message
Show quoted text
On Mon, Aug 9, 2021 at 07:47 AM, <john.c.weiser@...> wrote:
I ran /home/pi/bin/conky/grid and got
pi@raspberrypi:~ $ /home/pi/bin/conky/grid
EN34nw04ss
Great! This tells us that the script is working and that the ruby gems are installed :-) Now let's look at another file. Run this command:
cat /run/user/$UID/
which should show you your grid square again. Please verify that it does.
?
--
73, de KM4ACK
|
|
|
Re: No Gridsquare in Conky but cgps gives me good information.
On Mon, Aug 9, 2021 at 07:47 AM, <john.c.weiser@...> wrote:
I ran /home/pi/bin/conky/grid and got
pi@raspberrypi:~ $ /home/pi/bin/conky/grid
EN34nw04ss
Great! This tells us that the script is working and that the ruby gems are installed :-) Now let's look at another file. Run this command:
cat /run/user/$UID/gridtext.info
which should show you your grid square again. Please verify that it does.
?
--
73, de KM4ACK
|
|
|
Re: BAP 3.0.8 on Raspi 4B, 2GB makes a complete install
You have have clicked the "check all and continue" button at the bottom of the window. --
73, de KM4ACK
|
|
|
Hey Bob, Can run this command and post the results please: cat /usr/share/applications/hamrs.desktop--
73, de KM4ACK
|
|
|
Re: Fixed low voltage warning on my Pi systems with a cable upgrade
Lots of different power supplies.? Ones like the official Raspberry Pi and USB power cubes of different manufacturers and amperages.? This obviously only works with power supplies that have a USB socket on them.? The wired supplies can't use the heavier cable.? When the lightening bolt is on or now the message of low voltage appears, your Pi performance is severely restricted.
|
I believe you have a couple places that need inspection, mainly it looks like there is no rig definition.? ? From an Ardop speed perspective, Ardop is like an old dial up internet modem.? The Forced keyword right above the speed allows it to send a connection and then negotiate a speed acceptable to both radios given the band / connection conditions.? The dirtier the connection, the lower the speed.? So 500 is good to get things ironed out then i would recommend going to 2000 and let the radios decide on an ultimate speed.
I have edited your file to show a couple differences with mine *BOLD*.? I use an ICOM 7100 so my config may be a bit different than you need but this may help you.
{
? "mycall": "K0JNR",
? "secure_login_password": "PWD",
? "auxiliary_addresses": [],
? "locator": "EM48ON",
? "service_codes": [
? ? "PUBLIC"
? ],
? "http_addr": "0.0.0.0:5000",
? "motd": [
? ? "Open source Winlink client - getpat.io"
? ],
? "connect_aliases": {
? ? "KF4LXS-20M-14107.4": "ardop:///KF4LXS"? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? DELETE THIS
? },
? "listen": [],
? "hamlib_rigs": {
? ? ? "my-rig": {
? ? ?"address": "127.0.0.1:4532",
????? "network": "tcp"
? ? ?} },
? "ax25": {
? ? "port": "wl2k",
? ? "beacon": {
? ? ? "every": 3600,
? ? ? "message": "Winlink P2P",
? ? ? "destination": "IDENT"
? ? },
? ? "rig":?"my-rig"
? },
? "serial-tnc": {
? ? "path": "/dev/ttyUSB0",
? ? "baudrate": 9600,
? ? "type": "Kenwood"
? },
? "winmor": {
? ? "addr": "localhost:8500",
? ? "inbound_bandwidth": 1600,
? ? "drive_level": 0,
? ? "rig": "",
? ? "ptt_ctrl": false
? },
? "ardop": {
? ? "addr": "localhost:8515",
? ? "arq_bandwidth": {
? ? ? "Forced": false,
? ? ? ? ?"Max": 500
? ? },
? ? "rig": "my-rig",
? ? "ptt_ctrl": true,
? ? "beacon_interval": 0,
? ? "cwid_enabled": true
? },
? "pactor": {
? ? "path": "/dev/ttyUSB0",
? ? "baudrate": 57600,
? ? "rig": "",
? ? "custom_init_script": ""
? },
? "telnet": {
? ? "listen_addr": ":8774",
? ? "password": ""
? },
? "gpsd": {
? ? "enable_http": false,
? ? "use_server_time": false,
? ? "addr": "localhost:2947"
? },
? "schedule": {},
? "version_reporting_disabled": false
}
toggle quoted message
Show quoted text
Here is my config.json.? ?Also my quick stats are ARDOP Speed = 500, I have set this to 2000 with same results, ARDOP PTT is True, Listen Modes is ardop, Rig Control is yes, Pat Port is 5000.
{ ? "mycall": "K0JNR",
? "secure_login_password": "PWD",
? "auxiliary_addresses": [],
? "locator": "EM48ON",
? "service_codes": [
? ? "PUBLIC"
? ],
? "http_addr": "0.0.0.0:5000",
? "motd": [
? ? "Open source Winlink client - getpat.io"
? ],
? "connect_aliases": {
? ? "KF4LXS-20M-14107.4": "ardop:///KF4LXS"
? },
? "listen": [],
? "hamlib_rigs": {},
? "ax25": {
? ? "port": "wl2k",
? ? "beacon": {
? ? ? "every": 3600,
? ? ? "message": "Winlink P2P",
? ? ? "destination": "IDENT"
? ? },
? ? "rig": ""
? },
? "serial-tnc": {
? ? "path": "/dev/ttyUSB0",
? ? "baudrate": 9600,
? ? "type": "Kenwood"
? },
? "winmor": {
? ? "addr": "localhost:8500",
? ? "inbound_bandwidth": 1600,
? ? "drive_level": 0,
? ? "rig": "",
? ? "ptt_ctrl": false
? },
? "ardop": {
? ? "addr": "localhost:8515",
? ? "arq_bandwidth": {
? ? ? "Forced": false,
? ? ? ? ?"Max": 500
? ? },
? ? "rig": "",
? ? "ptt_ctrl": true,
? ? "beacon_interval": 0,
? ? "cwid_enabled": true
? },
? "pactor": {
? ? "path": "/dev/ttyUSB0",
? ? "baudrate": 57600,
? ? "rig": "",
? ? "custom_init_script": ""
? },
? "telnet": {
? ? "listen_addr": ":8774",
? ? "password": ""
? },
? "gpsd": {
? ? "enable_http": false,
? ? "use_server_time": false,
? ? "addr": "localhost:2947"
? },
? "schedule": {},
? "version_reporting_disabled": false
}
|
Here is my config.json.? ?Also my quick stats are ARDOP Speed = 500, I have set this to 2000 with same results, ARDOP PTT is True, Listen Modes is ardop, Rig Control is yes, Pat Port is 5000.
{
? "mycall": "K0JNR",
? "secure_login_password": "PWD",
? "auxiliary_addresses": [],
? "locator": "EM48ON",
? "service_codes": [
? ? "PUBLIC"
? ],
? "http_addr": "0.0.0.0:5000",
? "motd": [
? ? "Open source Winlink client - getpat.io"
? ],
? "connect_aliases": {
? ? "telnet": "telnet://{mycall}:CMSTelnet@...:8772/wl2k",
? ? "KF4LXS-20M-14107.4": "ardop:///KF4LXS"
? },
? "listen": [],
? "hamlib_rigs": {},
? "ax25": {
? ? "port": "wl2k",
? ? "beacon": {
? ? ? "every": 3600,
? ? ? "message": "Winlink P2P",
? ? ? "destination": "IDENT"
? ? },
? ? "rig": ""
? },
? "serial-tnc": {
? ? "path": "/dev/ttyUSB0",
? ? "baudrate": 9600,
? ? "type": "Kenwood"
? },
? "winmor": {
? ? "addr": "localhost:8500",
? ? "inbound_bandwidth": 1600,
? ? "drive_level": 0,
? ? "rig": "",
? ? "ptt_ctrl": false
? },
? "ardop": {
? ? "addr": "localhost:8515",
? ? "arq_bandwidth": {
? ? ? "Forced": false,
? ? ? ? ?"Max": 500
? ? },
? ? "rig": "",
? ? "ptt_ctrl": true,
? ? "beacon_interval": 0,
? ? "cwid_enabled": true
? },
? "pactor": {
? ? "path": "/dev/ttyUSB0",
? ? "baudrate": 57600,
? ? "rig": "",
? ? "custom_init_script": ""
? },
? "telnet": {
? ? "listen_addr": ":8774",
? ? "password": ""
? },
? "gpsd": {
? ? "enable_http": false,
? ? "use_server_time": false,
? ? "addr": "localhost:2947"
? },
? "schedule": {},
? "version_reporting_disabled": false
}
|
Morning Vic.
I've ordered a pi-zero and the banana pi isn't available until mid September here in France -- so I'll try the pi zero first.
73
Bruce G4ABX
|
Jim-K?JNR
Philip Clancy
km4ack
g4abx