开云体育

Build-a-Pi v3.0.8 moved the Update tool from Preferences to HamRadio->Build-a-Pi->Update Edited: I changed the mistake from 3.0.9 to 3.0.8. It was a typo. Sorry for the confusion

Mike, I use the Raspberry imager which is the easiest way to put the Raspberry Pi OS on an SD card. It has a download for Windows, macOS, and Linux. Information on the imager:

Mike, Once you have the zipped Buster download to your computer, you need to extract it and use something like Win32Disk Imager to copy it to the SD card. On Macs we use BalenaEtcher which will

Ok guy's. I'm very new to this Pi things as well as the language it uses and the OS. I have a Pi 4B and it came with a sd card loaded with Noobian. That went well. Now my problem. I was to create a

Having problem finding a source for the sata cards. Ordered on but what arrived was m.2 NVMe? which will? not work 73 de KE5WCT Mike

I had a similar issue, basically the gps did not get a lock on the satellites, even outside under the clear blue sky. There are likely more elegant solutions, but I re-flashed the sd card and loaded

Phil, You showed no "following error" on your email.? If you went to preferences and found Build-a-Pi then you are not on Version 3.0.8.? Build-a-Pi is found under "Hamradio" on version 3.0.8. 73

Hi Everyone, I went to Preferences > Build-a-pi and launched it and received the following error. Any help would be appreciated. 73, phil

See this thread ( /g/KM4ACK-Pi/topic/flmsg_update_error/84677404?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,84677404 ) -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) |

flmsg.cxx: In function 'int main(int, char**)': flmsg.cxx:1927:10: error: 'set_pname' is not a member of 'XmlRpc' XmlRpc::set_pname(pname);

Installed the new build 3.0.8 and when I went back to Preferences to find out what needed to be updated, Build-a-Pi was GONE!!! PANIC I then checked the Hamradio menu, and there was the update link

Thanks. I’ll wait for the “auto” update.

Hi In September we have our local Hamfest, run by the club I'm a member of and I'm also wearing two hats and running a table by our Shropshire Linux Users Group. We have run a Linux table at the

Not necessarily relate tot eh 3.0.8 build but a number of references to Conky and Some Err in the forums, link below....

Per Dave (FLMSG developer) it is a mistake in the FLMSG code. /g/linuxham/message/45831 His fix is posted here /g/linuxham/message/45828 but requires you to build

I reported to the FLDIGI developer. /g/linuxham/message/45849 -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter (

Same error for me this morning. Link to the solution please?

Just tested this solution. Flmsg is build normally. 73! Daff, LZ1DAF

Wrong Group. It was the NBEMS group /g/nbems/message/17482 73 *Don PoapsNew Westminster, BC*VA7DGP DATA VA7QU VOICE *Winlink: va7qu@... <va7qu@...>Subject://wl2k *

I saw something about FLmsg in the Linuxham. 73 *Don PoapsNew Westminster, BC*VA7DGP DATA VA7QU VOICE *Winlink: va7qu@... <va7qu@...>Subject://wl2k * ALLSTAR 530780 HH# 5971 HH# 11384