开云体育

Noip.com. ddns setup is the easiest. -- KD5PQJ - Herbert

I'm pretty sure there is a way to create a "domain" for your EES server when you are running on HotSpot, just not sure how to do it. Currently, http://10.10.10.10/email.php will get users to the

Here are the results of *cat /etc/ax25/axports* rob@pi41:~/pi-build $ cat /etc/ax25/axports # /etc/ax25/axports # # The format of this file is: # # name callsign speed paclen window description # #1

Run this command: cat /etc/ax25/axports and post the results so we can take a look at axports configured -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

BAP is no longer being developed. Give 73Linux a try which can be installed on top of BAP. https://github.com/km4ack/73Linux?tab=readme-ov-file#install 73Linux is very similar to BAP but also supports

Use 73Linux instead of BAP. https://github.com/km4ack/73Linux?tab=readme-ov-file#install You'll have better luck. There are some known issues though with Wayland. Conky doesn't work. VARA won't

My problem ( /g/KM4ACK-Pi/message/12595 ) with getting the “ *Unable to establish connection with remote: No AX:25 ports configured* ” error in the Pat mailbox window in Chrome is

Yes, I'm seeing lots of packets and decoding them. The map in XASTER fills right up, the one in YAAC doesn't show any. If I look in the decode texts, it is loaded with stations, except for mine. The

Step one is rx packet with good success so you should be able to ignore PTT and it sounds like you solved PTT anyway. The radio sound should be consumed by direwolf and you should see raw packet

I tried the "PTT RIG 2? localhost:12345" and it complained with the error: "Retrying Hamlib Rig open..." So far, in direwolf.conf I have tried all of the following, or some variation: # #PTT COM1 RTS

Will build a pi work on a pi 5, as see a lot of software have issues, thanks Lee

Thank you Jason and Kelly. I followed the video and Pat Winlink started up, but I got this error “…No AX:25 ports configured”. What did I do wrong?

Kelly is spot on. This video has more detail - https://youtu.be/yp5rghcNO4Q -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter (

dire wolf cant get rig control the port issue could be a problem with port 5000 and not 8080 k

the correct port is 12345 now, so the line should read.. start flrig make sure its working, and open dire wolf after PTT RIG 2 localhost:12345

I've also noticed that YACC doesn't any longer populate the map with stations heard, just my k1ypp-10. That did work, but now, does not. However, XASTIR still populates the map but has that constant

Made no difference, plus, I have to get it running before Direwolf times out. Thanks Dennis, K1ypp

I am setting up a Raspberry Pi 4 GB previously configured with Build-a-Pi for my new ICOM IC-705 using these two videos: *ICOM 705 Build a Pi Setup* https://youtu.be/JnDutR-ReR4?si=uERZVlmIutCQiMFM

Yes start flrig after start direwolf k

Thanks Kelly: I did try that and I get: Dire Wolf version 1.7 Includes optional support for:? hamlib cm108-ptt Reading config file direwolf.conf Audio device for both receive and transmit: