开云体育

Rob, you can open your downloads folder and unzip what you want for example you could unzip 'VARA HF v4.8.6 setup.zip' which would give you a setup.exe file for VARA HF in the same directory (you can

If I can figure how to do it, I will contribute to the project.

Kelly wrote: I did this and it downloaded a bunch of .zip’ed windows .exe files (listed below). How do I do the actual manual install of all of these files? Do I run a script or install them each

Same thing happen to me when reloading 73 Linux over a successful load, I didn't notice if mine was in the German or not.? I ended up deleting the partition (mine is setup as a dual boot) and

For some reason this happens when the language is set to German. Change the language to English and it should work fine. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

hi there, I try to move from Pi to a small desktop using Linux73. Installation did run but with the first steps of configuration it failed: no apps and after klick on 'Build it' it stopped. see

My comment was not to op it was to his commenters

Doh! Should have MAN'd up. if_running pilinbpq works excellently. Thanks, Kelly.

Winelink project is currently offline, its needing a lot of fixes k

From the winelink github (where bap and 73linux get vara):

The first post in this thread addresses a lot of these issues fyi k

Vara zipped file is being hosted on the Winlink servers. I'm not sure how to word it. You click on the vara link and it puts you on a Winlink file server to download the latest file. 73 *Don PoapsNew

I am having this issue as well. I think the download link has changed agian.

Is this even related? Can we confirm this works before I downgrade my kernel.

I use this hat on my Zero, works beautifully

Like the Ethernet dongle? https://www.amazon.com/dp/B09GRL3VCN?psc=1&ref=ppx_yo2ov_dt_b_product_details Wifi dongle? https://www.amazon.com/USB-WiFi-Network-Adapter-Dongle/dp/B07P6N2TZH Both are

Thanks Bill! I may have to go back to an old is version and see if I can make it work. Bookworm no longer supports the wpa_supplicant.conf. It has to all be done in the imager tool including the id

Which usb dongles are you getting that boot off the lite bookworm?

I did finally get VARA installed on my Pi4B.? But I agree with you.? A cheap, decent laptop is much better.? A Pi is simply too slow.? I have an old Lenovo laptop, not the fastet car in the

What Kelly said plus add in micro-to type A or B adapters, OTG micro to A or B adapters, and a micro hub with 4 type A ports are extremely handy. and maybe a 3 pack of micro usb to type c adapters. I