开云体育

If someone has time in the next few days, could you take a look at the two short videos in the link below? I have not had any issues with any other digital mode, but cannot connect to a gateway with

Always keeping me on my toes :-) -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) | Store (

You will be able to upgrade from 3.0.2 once it's released. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) |

Thanks Jason. Will the final version require a new copy of Buster, or just this beta? -- 73 de N5RKE

one can simply use: *grep http_addr ?~/.wl2k/config.json*

Build-a-Pi 3.0.3 is nearing completion. This version will include support for more GPS units, the addition of Gpredict and a number of other improvements. The complete change log is here (

Thanks Jason. I hadn't even considered that. Will give it a go and report back to the group. J J. *Jeremy LeRay* *New Bern Web Design, LLC* 315 Metcalf Street New Bern, NC 28562 newbernwebdesign.com

The only time I have had this issue before, there was RF getting back into the pi. Try shorting all of the cables as much as possible and add ferrite beads to every cable. You might even want to

Bill, It sounds like you accidentally deleted the pi-build directory instead. Try running: *cd ls | grep pi-build * and see if it returns "pi-build" If it returns "pi-build" then I am wrong and you

It is more than likely a port number issue. Run this command: *cat ~/.wl2k/config.json | grep http_addr* and it will return something like this "http_addr": "0.0.0.0:5050", In the above example, the

Good day, I am wondering if someone has a similar setup. A how-to document/link that shows the hardware setup, software setup plus demo use guide would be of great help for my go-box. Cheers and

I have the same problem.? I ran rm -rf ~/pi-build/temp/* Now whenever I run BAP script, I get this: invalid desktop entry file 'usr/share/applications/build-a-pi.desktop' I have no idea what to do

Like that angle adapter. Glad the case is working for you. 73, Dwayne ________________________________ Sent: Friday, July 31, 2020 5:02:26 PM To: [email protected] <[email protected]> Subject: Re:

Hello everyone, I'm brand new to all of this so I'm enjoying learning along the way. The pi build was a great extension of the technical side of what I do for a living but with less pressure. That's

I like the L adapter and yours looks a lot better than mine. I don't have a Dremel so I had to be a little more primitive in my technique. Works great otherwise. J. *Jeremy LeRay* *New Bern Web

The Pi case arrived in today’s mail. With about 20-minutes of work with a Dremel and some hand filing, I opened the port for the 12v supply. It’s not the tidiest or best work, but it will work.

it is interesting how much we take for granted -- without investigation! Its surprising anything works! 73 Bruce G4ABX

Mine is not updating as well. Same python error. No updating for FLrig or CHIRP. Tried running the script but still no joy. Thanks for any advice. de KK7PW

Grant, Can u? send me the pin out for ur 857 the 5pin to audio connection I may end up making me one -- Sent from Yahoo Email App for Android

All of the sudden, my Pat Winlink is no longer working. Getting this error. Reinstalled Pat with no luck. Can't figure this out. Internet connection is good, browser works, and haven't changed a