Pros and cons of 64 bit build?
What might we expect the pros and cons of a working 64 bit build to be?
Faster? Smaller?
Faster, bigger?
More efficient memory use?
Would appreciate comments of those that might know!
TY
|
Thanks for the response, Bryan.
? Dan
|
32-bit.? I tried 64-bit before BaP v3 came out and really had a mess.? Things may have settled with Bullseye 64-bit by now.
Dan
N7SHM
|
Re: sound settings in raspberry pi 4 and in wsjt-x
#wsjt-x
#flrig
Hi Doug, I have a G90 that works well with WSJTX. Unfortunately, my connection does not include a digirig or the Xiegu C19, so these settings may not work for you. I run a line from the ACC jack that splits in two and goes directly into an inexpensive usb sound card connected to the PI. I primarily use Pat winlink, JS8call and WSJT-X and don't make any changes in between.? My settings on the G90 are:
Mic gain 10
input line
AGC off
aux in 8
aux out 15
The Pi pulse audio volume control is set to 56% on my soundcard input and 51% on output.
?
Hope this helps. Let me know if there is anything else you need.
?
Bryan/KN4EBW
|
I was having trouble with not being able to access VNC and the system seemed to have frozen several times over the first week or so of install. A restart would fix it. But I came here to let you know that I have applied all available updates and have not had any problems with the system or any applications that I use for at least the past 5 days now. That said, I only use Conky, JS8Call, WSJTx Flrig and Patwinlink. Most of my SDR stuff is on my Windows machine with a different radio. I am on 32bit Bullseye.
|
Hi Dan
I don't think I can help, but a question, is this on a 32bit or
64bit system?
Marty kd8bj
toggle quoted message
Show quoted text
Am I the only one struggling with Bullseye?? Setup: RPi 4, 8GB.
Eviciv 7" touchscreen/case + VNC.
It seems like every time I turn around, something stops working.?
Right now, it's screen blanking on the physical device.? For the
time being, at least, while configuring and testing, I turn off
screen blanking while I do most work via VNC.? The screen was
staying on until, after a couple reboots, it started blanking
after awhile.? Sure enough, the switch in RPi Configuration (GUI)
was turned back 'on'. Turned it back off and went back to work.?
Online research shows Bullseye has been plagued with related
trouble for months.
Today, the "switch" is still off, but the screen is still blanking
and the touchscreen is unresponsive.? Reboot and the physical
device (display, touch UI, and BT keyboard) works fine until the
screen blanks.? VNC continues working, regardless.? I'm confident
that the physical device is stable because it's completely stable
upon a new OS flash.? Yesterday, CubicSDR with an RSP2Pro suddenly
(and again) broke while I was working on something completely
unrelated and seemingly innocuous.?
I'm becoming convinced that Bullseye, components, and applications
are not sufficiently stable for the appliance-like functionality
that I'm seeking.? Not being new to Linux (25 years) or RPi
"appliances", I'm really getting frustrated trying to get a basic
set of BaP functions all configured and running stable.? Past
experience suggests this isn't a hardware issue.? Even doing
(semi-) regular SD card copies for system snapshots, I've had to
start from scratch a couple times.? The SDR setup went kaput
yesterday right after I started seeing "updates available"
although I didn't install anything.? At this point, I'm going to
have to turn off all updates and maybe even disconnect the network
altogether.
Anyone else seeing similar?
?? Dan
?? N7SHM
|
Re: Build a Pi 64 bit Beta Testers Needed
I'll just toss my "Installed everything with no problem" in there as well.
I don't have a radio currently to hook up to, but will be trying them with wfview on a remote station as I was using the previous 32 bit build that way. No hiccups during install at all.
|
Re: Build a Pi 64 bit Beta Testers Needed
I was able to install the entire BAP package. Now to start actually trying out some of the programs...
Nice job...
73, Ken NB6S
|
Am I the only one struggling with Bullseye?? Setup: RPi 4, 8GB. Eviciv 7" touchscreen/case + VNC.
It seems like every time I turn around, something stops working.? Right now, it's screen blanking on the physical device.? For the time being, at least, while configuring and testing, I turn off screen blanking while I do most work via VNC.? The screen was staying on until, after a couple reboots, it started blanking after awhile.? Sure enough, the switch in RPi Configuration (GUI) was turned back 'on'. Turned it back off and went back to work.? Online research shows Bullseye has been plagued with related trouble for months.
Today, the "switch" is still off, but the screen is still blanking and the touchscreen is unresponsive.? Reboot and the physical device (display, touch UI, and BT keyboard) works fine until the screen blanks.? VNC continues working, regardless.? I'm confident that the physical device is stable because it's completely stable upon a new OS flash.? Yesterday, CubicSDR with an RSP2Pro suddenly (and again) broke while I was working on something completely unrelated and seemingly innocuous.?
I'm becoming convinced that Bullseye, components, and applications are not sufficiently stable for the appliance-like functionality that I'm seeking.? Not being new to Linux (25 years) or RPi "appliances", I'm really getting frustrated trying to get a basic set of BaP functions all configured and running stable.? Past experience suggests this isn't a hardware issue.? Even doing (semi-) regular SD card copies for system snapshots, I've had to start from scratch a couple times.? The SDR setup went kaput yesterday right after I started seeing "updates available" although I didn't install anything.? At this point, I'm going to have to turn off all updates and maybe even disconnect the network altogether.
Anyone else seeing similar?
?? Dan
?? N7SHM
|
Re: BAP where is the hamclock folder?
I hope "large" does not mean full screen.? I want it just big enough
to read the text but not full screen.? Thanks for the information!
David
Am 01.03.22 um 15:16 schrieb km4ack:
toggle quoted message
Show quoted text
The executable file
is in /usr/local/bin/ You can also use the BAP update tool to
change the size (large/small) by reinstalling.
--
73, de KM4ACK
|
|
|
Re: Build a Pi 64 bit Beta Testers Needed
Clean install of RPiOS-64
sudo apt update && sudo apt upgrade -y
cd ~
git clone https://github.com/km4ack/pi-build.git
cd ~/pi-build
git checkout dev
bash build-a-pi
Select Conky & VNC Viewer for install
runs through the process
reboot
Wall paper changed
Conky runs,
VNC Viewer not found
re-run Hamradio, Build-a-Pi, Update tool
VNC Viewer: not installed.
Check it for installation
Click Install/Update Selected
Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://security.debian.org/debian-security bullseye-security InRelease
Hit:3 http://deb.debian.org/debian bullseye-updates InRelease
Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
Reading package lists... Done???????????????????????????? ?
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Calculating upgrade... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
--2022-03-01 09:27:29--? https://realvnc.com/download/file/viewer.files/id=download-link-path%22
Resolving realvnc.com (realvnc.com)... 54.187.227.204
Connecting to realvnc.com (realvnc.com)|54.187.227.204|:443... connected.
HTTP request sent, awaiting response... 301 Moved Permanently
Location: https://downloads.realvnc.com/download/file/viewer.files/id=download-link-path" [following]
--2022-03-01 09:27:29--? https://downloads.realvnc.com/download/file/viewer.files/id=download-link-path%22
Resolving downloads.realvnc.com (downloads.realvnc.com)... 18.67.76.6, 18.67.76.117, 18.67.76.82, ...
Connecting to downloads.realvnc.com (downloads.realvnc.com)|18.67.76.6|:443... connected.
HTTP request sent, awaiting response... 403 Forbidden
2022-03-01 09:27:30 ERROR 403: Forbidden.
--2022-03-01 09:27:30--? http://value=/
Resolving value= (value=)... failed: Name or service not known.
wget: unable to resolve host address ¡®value=¡¯
dpkg: error: cannot access archive 'id=download-link-path"': No such file or directory
rm: cannot remove 'id=download-link-path"': No such file or directory
rm: cannot remove 'value=': No such file or directory
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Package 'libhamlib4' is not installed, so not removed
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
|
Re: Build a Pi 64 bit Beta Testers Needed
Installed everything last night and the install went smoothy.
WSJTX installed and works. No problems
Ryan NC4RA
|
As requested.? At the end of the crontab -l listing, I also added the list of PIDs using ps -A.
Thanks for your help.
73 de N4VIP (BTW, I noticed that another member of your group is N2VIP)
Don
Interesting. Something has to be starting multiples at boot. Run this command and post the results please:
crontab -l
--
73, de KM4ACK
|
|
-- 73 de N4VIP, Don - SFARES Inc. Treasurer
|
Interesting. Something has to be starting multiples at boot. Run this command and post the results please: crontab -l--
73, de KM4ACK
|
|
|
Re: Trouble with EFHW kit
#efhw
Mike is correct. Each kit ships with ~68 feet of wire allowing the operator to tune it for their favorite portion of the band. --
73, de KM4ACK
|
|
|
Re: BAP where is the hamclock folder?
The executable file is in /usr/local/bin/ You can also use the BAP update tool to change the size (large/small) by reinstalling. --
73, de KM4ACK
|
|
|
Re: Build a Pi 64 bit Beta Testers Needed
Are you concerned about VNC Viewer installing correctly, or VNC SERVER?
VNC Viewer
Great work! The specific items of interest for testing were installed. Working great as far as I can tell.
ONE MINOR item noted, FLRIG startup shortcut installed? in?menu://applications/Hamradio and not in??menu://applications/Hamradio/FLSUITE.
Will?install more apps and test as time becomes available.
Thanks for the report. I'll look into the FLRIG shortcut.
Installed everything today. Install went smoothly. WSJTX and CQRLOG were not installed. I installed CQRLOG 64 bit from the repository and it ran fine. WSJTX 2.5.4 from Source Forge will not install. The older 2.3 64 bit installed fine. More testing tomorrow.
Thanks for the reminder on CQRLOG. Can you try installing WSJTX again using BAP update tool? It installed fine here yesterday. --
73, de KM4ACK
|
|
|
BAP where is the hamclock folder?
I wanted to change the size of the hamclock window bu could not find ESPHamClock in my home directory.? Where is it?? I tried using the "find" command but couldn't find the folder.?
|
Yeah, I kinda was hoping that EVERYTHING in BAP was compiled at build time for the architecture it is running on, but Jason (KM4ACK) confirmed what you said and your testing revealed ¨C it¡¯s a no-go. ? Oh well. ? It was an interesting idea. The laptop would make a nice control surface for a headless RPi running BAP, so there is that. ? Thanks, ? Ken, N2VIP ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of N3VMT via groups.io Sent: Monday, February 28, 2022 9:36 PM To: [email protected]Subject: Re: [KM4ACK-Pi] BAP on Intel Linux? ? Ken
BAP is a compilation of? programs and? scripts for the ARM-cpu you can get some them through the Synapic repositories bi the BAP will not work x86 processors sorry.
Bill,N3VMT
ps I tried to us the BAP on a few Linux builds
|
Ken
BAP is a compilation of? programs and? scripts for the ARM-cpu you can get some them through the Synapic repositories bi the BAP will not work x86 processors sorry.
Bill,N3VMT
ps I tried to us the BAP on a few Linux builds
|
Bryan Waller
ZL2TOY
Ken Crouse
Ryan
km4ack
N3VMT