Keyboard Shortcuts
Likes
- KM4ACK-Pi
- Messages
Search
Re: After run BAP flrig is not installed
#flrig
Are you running the latest version of BAP? There was some issues with the FLSUITE in 3.0.7 that were documented here -- 73, de KM4ACK
|
|
|
Re: After run BAP flrig is not installed
#flrig
¿ªÔÆÌåÓýHi Erwin,Not sure what is happening in your situation, but during the last two days I have done about 6 times a fresh install of Build-a-Pi 3.0.8 without any issues on a Raspberry Pi 4 (4Gb). I used the latest Raspberry Pi OS: 2021-05-07-raspios-buster-armhf. (The fresh installed were because I was trying to do all kind of crazy stuff, not due to issues with build-a-pi). If you haven¡¯t tried it yet, I would just try another full fresh install. (Just to be sure. Flrig is under ¡®Amateurradio, flsuite¡¯ menu option) Hope you get it working soon. Best regards, Alex
|
Sendng photo
#pat-mail
Thanks again for a 100% system
when i want to send a photo via pat mail. Does pat autosize photo? or must photo ve a certain size for using pat mail and ardop reason for question is that seems if we use the windows way it send a bigger file than compared to pat mail de v51pj pieter jacobs |
After run BAP flrig is not installed
#flrig
Hi, 73 de Erwin, OE1EKG? |
FT-891 Settings
Please send me your FT-891 settings. I am trying to figure out why my Pi's don't work as they should.
As a starter, to help me diagnose my problem, I need your FT-891 settings (i.e.those settings that you have changed from factory settings)? My hardware setup includes: 1. Signalink 2. USB cable between Pi? & the FT-891 3. Pi 3B or a Pi 3B+ 4. FT-891 (Later, I will also use a FT-818) 5. KB, Mouse, Monitor (I will go headless later, using my Chromebook) My primary interest at the moment is getting WSJT-X FT8 going for POTA portable operation. I have loaded BaPi on both versions of the Pi. Separately, I have loaded WSJT 2.4 and hamlib 4.2 independantly on to the Raspberry OS. This works mostly except power level. BaPi versions won't transmit. A while back, maybe a couple of years, I had the Pi's going with WSJT/Hamlib.... thoroughly documented. This no longer works with the advent of WSJT 2.4 and Hamlib 2.4. PS: I have been using FT8 every since it came out, mostly in my base station FT-991......still working to this day. Eventually, I'll get around to using other features of the BaPi system. Thanks, Ken KB4XT |
Re: JS8Call Audio frustration
Problem Solved (as far as I can tell)
I run JS8Call in SSB mode instead of Digital mode so I needed to change menu #106 "SSB Mic Select" to "REAR". ?? For some reason I think win7 was letting me get away with leaving #106 set to "Mic". ...and for some reason the front mic is still working fine in SSB Fritz NM5XD |
Re: JS8Call Audio frustration
&*%@^...? I just tried to edit my last post but managed to delete it some how
(try #2) I changed the mode "Settings>Radio>Rig Options>Mode" to Data/Pkt per Benjamin's suggestion and I get audio going to the radio (got a reply to an HB).? BUT... when the radio goes into Data USB mode I get an ugly splatter on the waterfall. Nothing is being transmitted but the radio is sending a nasty tone to JS8Call. Still some bugs to sort out but at least it's progress. Thanks for the help! Fritz NM5XD P.S.? I do have #142 VOX set to DATA |
Re: FLRiG won't work with IC-7610
#flrig
dmesg produces a lot of output. ?The key is to run the command just after you plugged the usb into the pi.
Another command you might find useful is: ls -l /dev/serial/by-id |
Re: Makerfocus dock
¿ªÔÆÌåÓýHi I don't know if I ever saw a standard for these power connectors, sometimes called coaxal connectors too, but have tested a lot of them and all I have tested were center positive. So I just assumed a standard, as usual you mileage may very. So I
always check.
Marty kd8bj
On 8/19/21 6:01 PM, KI5EVJ - Richard
via groups.io wrote:
Norrin, |
Re: JS8Call Audio frustration
Trying to do the exact same thing.? So glad to find this thread.
Right-clicking the speaker icon on Pi menu bar, though, just gives me 'No audio devices found' Is there some power-up order I've got wrong? My F991-a menu matches the shots above. When JS8Call matches the above, I cannot match the audio because those are not available. Just quit WSJTX (tried it, some problem) and started JS8Call to show my menu. Transmit light started flashing as though I've got two things trying to transmit at once? There is nothing plugged into the front of the radio. Only power, ant, and USB plugged into the back. |
Re: Can't get PAT to communicate with a station
#pat-mail
¿ªÔÆÌåÓýSo Scott, I did find this in the winlink forums The items these folks had were simple 1.? A potentially corrupted whitelist 2.? Email address not on the white list 3.? A forgotten forward setup in the winlink settings I know its a long shot but thought i would put it out just in case Thanks, Terry K4HNT ---- On Thu, 19 Aug 2021 17:23:27 -0400 Scott <scott.stys@...> wrote ----
|
Re: Makerfocus dock
On Thu, Aug 19, 2021 at 08:29 AM, km4ack wrote:
This is my preferred case with the makerfocus hat - ?I just ordered one of those cases, but now it say they are out of stock. Hopefully it's a short-term thing. This case looks like a good alternative: https://www.amazon.com/GeeekPi-Raspberry-Low-Profile-Horizontal-Included/dp/B085HFTMB1/142-4443990-8368761?psc=1 -- Al AE2T |
Re: Makerfocus dock
¿ªÔÆÌåÓýNorrin,I checked with Powerwerx. The tech guy I spoke with said he was 99.9% sure the cable was positive center. He felt it was the standard configuration. Mine should arrive Saturday. If different I¡¯ll post.? Richard On Aug 19, 2021, at 3:54 PM, KB8SRX <kb8srx@...> wrote:
|