I also had this error. It seems to be a problem with flxmlrpc lib. On my Pi4 this library was installed via apt-get command. I removed it and build flxmlrpc from source. Then again got this error. Last I removed the flxmlrpc lib (actually I removed the headers only (the -dev package) ) and then build flmsg with internal flxml support. (The configure script automatically does this if doesn't find needed header files.) That way flmsg was build without errors.
I'm going to replicate this on my desktop machine. If there is a problem I will write to developers of fldigi suite.
73,
Daff LZ1DAF
toggle quoted message
Show quoted text
On 5.08.21 §Ô. 5:50, Wesley Magyar wrote: trying?to compile the latest update?and it errora?out any ideas?
|
Re: Donation dialog keeps popping up
Thanks for info, Jason.
Maybe it's best to to a fresh install.
73 de SA5QED David
|
Hello All:
I created a new image for an RPi 4/2GB and installed the Beta 3.0.8. All went well, but the GPS does not seem to be working. Conky says SOME ERR and GPSD shows no sensor. Is there a dialog on BETA 3.0.8 and GPS issues?
Thanks,
--
Jeff Marden
N1JCM
|
toggle quoted message
Show quoted text
On Aug 5, 2021, at 7:43 AM, km4ack <jason.oleham@...> wrote:
?Version 4.0.17 was installed on my test box. I attempted to update to 4.0.19 and ran into the same issue you did. Let me did into it later today and see if it is an issue with Build a Pi or FLMSG. --
73, de KM4ACK
|
|
|
Version 4.0.17 was installed on my test box. I attempted to update to 4.0.19 and ran into the same issue you did. Let me did into it later today and see if it is an issue with Build a Pi or FLMSG. --
73, de KM4ACK
|
|
|
Is this a Pi 3 or Pi 4? I just did a build a couple of days ago on a Pi 3 and didn't run into any issues. Have you tried installing again to see if you get the same results. --
73, de KM4ACK
|
|
|
Re: Donation dialog keeps popping up
You should only see that dialog box after reboot of a new build or after you run a Build a Pi update. It should not appear after every reboot. --
73, de KM4ACK
|
|
|
Now that is a fantastic idea! --
73, de KM4ACK
|
|
|
trying?to compile the latest update?and it errora?out any ideas?
flmsg.cxx: In function \u2018int main(int, char**)\u2019:
flmsg.cxx:1927:10: error: \u2018set_pname\u2019 is not a member of \u2018XmlRpc\u2019
? XmlRpc::set_pname(pname);
? ? ? ? ? ^~~~~~~~~
make[2]: *** [Makefile:2065: flmsg-flmsg.o] Error 1
make[2]: Leaving directory '/home/pi/Downloads/flmsg-4.0.19/src'
make[1]: *** [Makefile:833: all] Error 2
make[1]: Leaving directory '/home/pi/Downloads/flmsg-4.0.19/src'
make: *** [Makefile:398: all-recursive] Error 1
Making install in src
make[1]: Entering directory '/home/pi/Downloads/flmsg-4.0.19/src'
make ?install-am
make[2]: Entering directory '/home/pi/Downloads/flmsg-4.0.19/src'
g++ -DHAVE_CONFIG_H -I. ?-I. -I./include -I/usr/local/include/flxmlrpc ?-I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/freetype2 -I/usr/include/libpng16 -I/usr/include/cairo -I/usr/include/glib-2.0 -I/usr/lib/arm-linux-gnueabihf/glib-2.0/include -I/usr/include/pixman-1 -I/usr/include/uuid -I/usr/include/freetype2 -I/usr/include/libpng16 ?-I. -I./include ? -pipe -Wall -fexceptions -O2 -ffast-math -finline-functions -fomit-frame-pointer ? -DNDEBUG -I/usr/local/include/flxmlrpc -g -O2 -MT flmsg-flmsg.o -MD -MP -MF .deps/flmsg-flmsg.Tpo -c -o flmsg-flmsg.o `test -f 'flmsg.cxx' || echo './'`flmsg.cxx
flmsg.cxx: In function \u2018int main(int, char**)\u2019:
flmsg.cxx:1927:10: error: \u2018set_pname\u2019 is not a member of \u2018XmlRpc\u2019
? XmlRpc::set_pname(pname);
? ? ? ? ? ^~~~~~~~~
make[2]: *** [Makefile:2065: flmsg-flmsg.o] Error 1
make[2]: Leaving directory '/home/pi/Downloads/flmsg-4.0.19/src'
make[1]: *** [Makefile:3686: install] Error 2
make[1]: Leaving directory '/home/pi/Downloads/flmsg-4.0.19/src'
make: *** [Makefile:398: install-recursive] Error 1
|
What a cool idea and it looks like everyone is learning a lot!!
Keep learning and enjoying the hobby!
73,
toggle quoted message
Show quoted text
Our club, YCARS.org had Raspberry Pi Day on Mon, Aug 2, 2021. Everyone brought their Pi's and we installed an image and installed Hamclock. It was sponsored by the "Ladies of YCARS". Fun stuff.
|
Re: Donation dialog keeps popping up
You didn't once you were hooked that you were hooked well??
I'm not sure how Jason is controlling that I'm sure just a flag but it doesn't pop up here so probably something minor that didn't set.
toggle quoted message
Show quoted text
Just made a fresh install with BAP 3.0.8 Beta. Works fine.
But the "Build a Pi installation complete, consdier-a-donation via Paypal (which I did ;-)"-dialog box pops up after every reboot.
Something gone wrong with the script OR is this something to expect after every reboot..?
73 de SA5QED
|
Re: Chromium won't sync
#bap
I just did a sudo apt update && sudo apt upgrade && sudo apt install chromium on my Pi4 with May 7 2021 build, and no other repositories for Chromium and got:
Chromium Version 90.0.4430.212 (Developer Build) built on Debian 10.2, running on Debian 10.10 (32-bit)
I don't get any issues with syncing anything...
Kevin - KD9EFV
|
Donation dialog keeps popping up
Just made a fresh install with BAP 3.0.8 Beta. Works fine.
But the "Build a Pi installation complete, consdier-a-donation via Paypal (which I did ;-)"-dialog box pops up after every reboot.
Something gone wrong with the script OR is this something to expect after every reboot..?
73 de SA5QED
|
After making a fresh install on a new Pi4 with BAP 3.0.8 beta yesterday, I cannot get Chromium to sync (bookmarks).
Chromium can save logins, to Gmail for instance, but it is not possible to "turn on sync" by clicking on the grey user icon to the right of the address bar in Chromium.
I am using Chromium?Version 88.0.4324.187 (Official Build) Built on Raspbian , running on Raspbian 10 (32-bit).'
On another Pi4 installed with BAP some months ago, I have the same version of Chromium with sync working...
I have done several reboots before this posting.
73 de SA5QED
|
Our club, YCARS.org had Raspberry Pi Day on Mon, Aug 2, 2021. Everyone brought their Pi's and we installed an image and installed Hamclock. It was sponsored by the "Ladies of YCARS". Fun stuff.
|
Re: Build a Pi 3.0.8 Beta
Installed Raspian fresh on a RPi3+ and did the 3rd option to install 3.0.8 Beta. All went fine and played with CONKY.conf to include a graphic. Works fine with the GPS for the gridsquare. Fun stuff. Next task will be to setup the FT-891 and try digital modes on the Pi doing POTA.? 
|
Hi David
That looks familiar and I will try it and see.
Thanks.
Marty kd8bj
On 8/3/21 8:50 AM, K2DW David wrote:
toggle quoted message
Show quoted text
I followed this from K5KHK, and worked FB? when I
needed to compile fldigi on a Pi2:
73!
--david
K2DW
On Tue, Aug 3, 2021 at 9:45 AM
Marty Hartwell < mhartwe@...> wrote:
Hi
all
I need a reminder on how to increase swap size to allow a 2GB
limited memory
system to compile Fldidi.
Thanks
Marty kd8bj
|
Here is how to do it Download latest form update from winlink Then go to /home/pi/.wl2k Unextract zipped file in file called Standard Forms.?
When composing a message. Choose template. It will open in browser. Fill in. Send and press ok. And close browser.? Send vua eadio or telnet
That is it.? Greetings from the Namib
Pieter Jacobs +264811277615 NETS NTNSS nets@...
toggle quoted message
Show quoted text
On 3 Aug 2021, at 9:56 AM, Pieter V51PJ via groups.io <v51pj@...> wrote:
? Noted under compose you can select template Then a pop up screen tell you to downlink forms from winlink Then it tell to unzip and then go to pat config and point forms file under forms_path But no forms_path box under pat config screen
Please advice I think that will sort the template issue out Greetings from the Namib
Pieter Jacobs V51pj On 3 Aug 2021, at 5:32 AM, Pieter V51PJ via groups.io <v51pj@...> wrote:
? I dont see either. Greetings from the Namib
Pieter Jacobs V51pj On 2 Aug 2021, at 10:50 PM, Dick Smith <w4rss@...> wrote:
?Does Pat Winlink support the use of Global Templates. I don't see a global folder in the Templates tree.
Dick
W4RSS
|
I followed this from K5KHK, and worked FB? when I needed to compile fldigi on a Pi2: 73! --david K2DW
On Tue, Aug 3, 2021 at 9:45 AM Marty Hartwell < mhartwe@...> wrote: Hi all
I need a reminder on how to increase swap size to allow a 2GB limited memory
system to compile Fldidi.
Thanks
Marty kd8bj
|
Hi all
I need a reminder on how to increase swap size to allow a 2GB limited memory
system to compile Fldidi.
Thanks
Marty kd8bj
|
km4ack
Brent - K4BSC
