¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. KM4ACK-Pi
  2. Messages
Expanded Topics Messages Polls
Date
Re: FLRiG won't work with IC-7610 #flrig

 

Marty is correct.? I had that error too and had to run the command he listed.

Tim
KB2MFS?

On Sun, Jul 18, 2021, 15:20 Marty Hartwell <mhartwe@...> wrote:

Hi Christ

You have run into the known problem from a recent change, which BAP will

catch up to in a future update. I think you can move forward by this command:

sudo apt install

which should install the missing libudev.h.

There has been an ongoing discussion last week in the "linuxham" discussion group.

Also earlier in this also.

Good luck, and I hope the package noted above is the correct one, you may be able

to confirm the above by searching in the archives too.


Marty kd8bj


On 7/18/21 11:32 AM, Christian wrote:
Hi

Just tried to update Build-a-pi, but got this error?message
Tried it two, and got the error both times :-(

Regards
Christ

Den s?n. 18. jul. 2021 kl. 01.52 skrev Tim and Janet <kb2mfs@...>:
I know that feeling.? Thanks for the help Kevin.

Tim
KB2MFS

On Sat, Jul 17, 2021 at 6:50 PM Kevin <kd9efv@...> wrote:
Hmmm... I'm out of ideas, but it's been a long day, and the hands and brain aren't talking to each other...

Re: FLRiG won't work with IC-7610 #flrig

 

¿ªÔÆÌåÓý

Hi Christ

You have run into the known problem from a recent change, which BAP will

catch up to in a future update. I think you can move forward by this command:

sudo apt install libudev.dev

which should install the missing libudev.h.

There has been an ongoing discussion last week in the "linuxham" discussion group.

Also earlier in this groups.io also.

Good luck, and I hope the package noted above is the correct one, you may be able

to confirm the above by searching in the archives too.


Marty kd8bj


On 7/18/21 11:32 AM, Christian wrote:

Hi

Just tried to update Build-a-pi, but got this error?message
Tried it two, and got the error both times :-(

Regards
Christ

Den s?n. 18. jul. 2021 kl. 01.52 skrev Tim and Janet <kb2mfs@...>:
I know that feeling.? Thanks for the help Kevin.

Tim
KB2MFS

On Sat, Jul 17, 2021 at 6:50 PM Kevin <kd9efv@...> wrote:
Hmmm... I'm out of ideas, but it's been a long day, and the hands and brain aren't talking to each other...

Re: FLRiG won't work with IC-7610 #flrig

 

Hi

Just tried to update Build-a-pi, but got this error?message
Tried it two, and got the error both times :-(

Regards
Christ

Den s?n. 18. jul. 2021 kl. 01.52 skrev Tim and Janet <kb2mfs@...>:

I know that feeling.? Thanks for the help Kevin.

Tim
KB2MFS

On Sat, Jul 17, 2021 at 6:50 PM Kevin <kd9efv@...> wrote:
Hmmm... I'm out of ideas, but it's been a long day, and the hands and brain aren't talking to each other...

updatepi1.JPG

Re: FLRiG won't work with IC-7610 #flrig

 

I know that feeling.? Thanks for the help Kevin.

Tim
KB2MFS

On Sat, Jul 17, 2021 at 6:50 PM Kevin <kd9efv@...> wrote:
Hmmm... I'm out of ideas, but it's been a long day, and the hands and brain aren't talking to each other...

Re: FLRiG won't work with IC-7610 #flrig

 

Hmmm... I'm out of ideas, but it's been a long day, and the hands and brain aren't talking to each other...
Re: FLRiG won't work with IC-7610 #flrig

 

Should have included that....sorry.

Yes tried both and still no connection.


Tim


On Sat, Jul 17, 2021 at 6:41 PM Kevin <kd9efv@...> wrote:
Did you try either of those?

Re: FLRiG won't work with IC-7610 #flrig

 

Did you try either of those?
Re: FLRiG won't work with IC-7610 #flrig

 

Yes both are listed along with many more.

Tim

On Sat, Jul 17, 2021 at 6:35 PM Kevin <kd9efv@...> wrote:
Do you have ttyS0 or ttyAMA0 listed in your dropdown?

Re: FLRiG won't work with IC-7610 #flrig

 

Do you have ttyS0 or ttyAMA0 listed in your dropdown?
Re: FLRiG won't work with IC-7610 #flrig

 

Here is the result:

pi@KB2MFS:~ $ ls -la /dev/ttyUSB*
crw-rw---- 1 root dialout 188, 0 Jul 17 18:27 /dev/ttyUSB0
crw-rw---- 1 root dialout 188, 1 Jul 17 18:27 /dev/ttyUSB1

After the groups command:

pi@KB2MFS:~ $ groups
pi adm dialout cdrom sudo audio video plugdev games users input netdev lpadmin gpio i2c spi

Tim
KB2MFS

On Sat, Jul 17, 2021 at 6:20 PM Kevin <kd9efv@...> wrote:

[Edited Message Follows]

What does the command:
ls -la /dev/ttyUSB* [enter]
show? Does it show root dialout? If so, run the command:
groups [enter]
if the list doesn't have dialout in it, run the command:
sudo usermod -aG dialout pi [enter]
and reboot, This should give you access.
edit: last command given, the mind knew the correct command but the fingers insisted on the wrong one...

Re: FLRiG won't work with IC-7610 #flrig

 
Edited

What does the command:
ls -la /dev/ttyUSB* [enter]
show? Does it show root dialout? If so, run the command:
groups [enter]
if the list doesn't have dialout in it, run the command:
sudo usermod -aG dialout pi [enter]
and reboot, This should give you access.
edit: last command given, the mind knew the correct command but the fingers insisted on the wrong one...
Re: FLRiG won't work with IC-7610 #flrig

 

Kevin,

This is the result after entering the information:

pi@KB2MFS:~ $ dmesg | grep tty
[ ? ?0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1920x1080M@60,margin_left=48,margin_right=48,margin_top=48,margin_bottom=48 smsc95xx.macaddr=DC:A6:32:E9:06:F4 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 ?console=ttyS0,115200 console=tty1 root=PARTUUID=42ee826e-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[ ? ?0.001102] printk: console [tty1] enabled
[ ? ?1.489549] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2
[ ? ?1.496652] printk: console [ttyS0] disabled
[ ? ?1.496785] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 37, base_baud = 62500000) is a 16550
[ ? ?1.496978] printk: console [ttyS0] enabled
[ ? ?3.380014] systemd[1]: Created slice system-getty.slice.
[ ?299.399991] usb 1-1.1.2: cp210x converter now attached to ttyUSB0
[ ?299.633992] usb 1-1.1.3: cp210x converter now attached to ttyUSB1

Not sure what it means but looks like it sees the 2 serial connections via USB and labeled them ttyUSB0 and ttyUSB1.


Thanks for the help.

Tim
KB2MFS




On Sat, Jul 17, 2021 at 9:55 AM Kevin <kd9efv@...> wrote:
On the Pi,? with one of the USB cables inserted, at a terminal or command line enter:
dmesg | grep tty [enter]
and report the results here, please.

Re: FLRiG won't work with IC-7610 #flrig

 

Thanks Kevin.? I will check later today once I get home and post the results.

Tim
KB2MFS?

On Sat, Jul 17, 2021, 09:55 Kevin <kd9efv@...> wrote:
On the Pi,? with one of the USB cables inserted, at a terminal or command line enter:
dmesg | grep tty [enter]
and report the results here, please.

Re: FLRiG won't work with IC-7610 #flrig

 

On the Pi,? with one of the USB cables inserted, at a terminal or command line enter:
dmesg | grep tty [enter]
and report the results here, please.
FLRiG won't work with IC-7610 #flrig

 

Good morning.

I have just added an Icom 7610 to the shack and trying to get the RPI4 and FLRig to work.? I am not a linux guru but have updated all software and the BAP shows them current.? FLRig loads and opens fine but I can't seem to get the serial port to load and communicate with the rig.? I see the 2 ports something like USUART 7610 and selecting them does not work.? When I plug the usb cable into the PI, I see 2 devices added when I run ls /dev.? However in this list they are listed as xxxx/USB0 and USB1.? I also tried to select these in the drop down list of FLRig to no avail.

I have the CI-V (remote) connected to an amplifier and the USB1 port connected to the RPI4.? I think I have manipulated every setting on the rig and nothing seems to work.

I finally took the windows 10 laptop to the shack and loaded the special Icom drivers and everything worked fine with FLRig as well as HRD.

Is there something special that needs to be done in Raspbian to make this work???

Thanks and 73
Tim KB2MFS
update of existing Build a Pi image

 

Hello,
as a new version of build a pi is now in beta status, I have following question: can I replace an existing build a pi by the new version and then update the existing system with the new build a pi version, or should I build up a new image from scratch on and then transfer the old data to the new image?

vy 73 de Klaus, DC2JR
Pat WinLink setup not keying my FT-dx10 via FLRig #flrig #pat-mail

 

Has anyone solved the pat Winlink PTT via flrig.?
I have flrig configured for my FT-dx10 (selected hamlib version 4.2? FT-dx101D Stable).
It works on WSJT-X, fldigi, js8call selecting FLRIG FLRIG.

I followed all the KM4ACK tutorials on Winlink on RPi.?
Pat-Mailbox works on telnet.? On ARDOP it doesn't key PTT.
On the piardop terminal, I get Input peaks.
The Pat-Mailbox connects OK in telnet - wl2k.
ARDOP connect gives the following:
ARDOP TNC (ARDOP TNC_1.0.4.1j-BPQ) initialized
Unable to set PTT rig '/usr/local/bin/rigctl -m4': not defined or not loaded

I must have an error in my pat configure.? I would greatly appreciate any advice.
{
?"mycall": "KG4IIC",
? "secure_login_password": "PASSWORD",
? "auxiliary_addresses": [],
? "locator": "DN23DC",
? "service_codes": [
? ? "PUBLIC"
? ],
? "http_addr": "0.0.0.0:5000",
? "motd": [
? ? "Open source Winlink client - getpat.io"
? ],
? "connect_aliases": {
? ? "telnet": "telnet://{mycall}:CMSTelnet@...:8772/wl2k"
? },
? "listen": [],
? "hamlib_rigs": {"FT-dx10": {"address": "localhost:4532", "network": "tcp"}},
? "ax25": {
? ? "port": "wl2k",
? ?"beacon": {
? ? ? "every": 3600,
? ? ? "message": "Winlink P2P",
? ? ? "destination": "IDENT"
? ? },
? ? "rig": "/usr/local/bin/rigctl -m4"
? },
? "serial-tnc": {
? ? "path": "/dev/ttyUSB0",
? ? "baudrate": 9600,
? ? "type": "Kenwood"
? },
? "winmor": {
? ? "addr": "localhost:8500",
? ? "inbound_bandwidth": 1600,
? ? "drive_level": 0,
? ? "rig": "",
? ? "ptt_ctrl": false
? },
? "ardop": {
? ? "addr": "localhost:8515",
? ? "arq_bandwidth": {
? ? ? "Forced": false,
? ? ? "Max": 500
? ? },
? ? "rig": "/usr/local/bin/rigctl -m4",
? ? "ptt_ctrl": true,
? ? "beacon_interval": 0,
? ? "cwid_enabled": true
? },
? "pactor": {
? ? "path": "/dev/ttyUSB0",
? ? "baudrate": 57600,
? ? "rig": "",
? ? "custom_init_script": ""
? },
? "telnet": {
? "baudrate": 9600,
? ? "type": "Kenwood"
? },
? "winmor": {
? ? "addr": "localhost:8500",
? ? "inbound_bandwidth": 1600,
? ? "drive_level": 0,
? ? "rig": "",
? ? "ptt_ctrl": false
? },
? "ardop": {
? ? "addr": "localhost:8515",
? ? "arq_bandwidth": {
? ? ? "Forced": false,
? ? ? "Max": 500
? ? },
? ? "rig": "/usr/local/bin/rigctl -m4",
? ? "ptt_ctrl": true,
? ? "beacon_interval": 0,
? ? "cwid_enabled": true
? },
? "pactor": {
? ? "path": "/dev/ttyUSB0",
? ? "baudrate": 57600,
? ? "rig": "",
? ? "custom_init_script": ""
? },
? "telnet": {
? ? "listen_addr": ":8774",
? ? "password": ""
? },
? "gpsd": {
? ? "enable_http": false,
? ? "use_server_time": false,
? ? "addr": "localhost:2947"
? },
? "schedule": {},
? "version_reporting_disabled": false,
? "forms_path": "/home/pi/.wl2k/Standard_Forms"
}
Thanks and 73
--
Russ - kg4iic
File /Custom-Conky-Files/.conkyrc_left uploaded #file-notice

[email protected] Notification
 

The following files have been uploaded to the Files area of the [email protected] group.

By: S Johnson <cascadianroot@...>

Description:
Horizontally-oriented Solar data image in a separate conky instance.

Re: Conky experts...

 

Upload works fine now, thanks Jason.?
Re: Build a Pi Update beta

 

Never make any statements of problems until you do a reboot.
Once rebooted, Build-a-Pi shows that Hamrs is installed!!

Embarrassed Les
WD5BYQ
9001 - 9020 of 13734