Re: 857 with Direwolf for 2M Packet
Where do the rig control tied at on the pi
--
Sent from Yahoo Email App for Android
|
Thank you!
--
Jack Haefner
|
Re: 857 with Direwolf for 2M Packet
Scott,
Attaching the pinouts for data, and also cat if you need it. ?My audio cables go to the data. ?I'd recommend using Les at - he's made a number of high-quality cables for me.
Here's the ?if you want to make your own.
?should also work.
Give me a shout if I can help further.
All the best,
Grant
|
Re: Odd ADIF problem with WSJTX 2.2.2
Michael,
Have the same issue, similar setup.
Just ignoring it for now. Hoping this will be fixed int eh next version.
72, Rhett, KB4HG
On Sun, Aug 2, 2020 at 11:31 AM Michael Aiello < n2htt.mike@...> wrote: HI I am using Build-a-Pi 3.0.2 which installs wsjtx v 2.2.2 - having a weird problem that I have never seen before. Every time I start wsjtx it reports an error - invalid adif header - and wsjtx ignores the previously logged contacts showing every station as not previously worked. Once the program starts, stations logged during the session are recognized as worked. If I exit the program and restart, I get the error and previous contacts are forgotten.
The log files are being created in the correct (default) directory, and permissions on the flies look fine. The contents of the ADIF file also look fine.
Anyone else run into this?
Thanks & 73
Mike N2HTT
|
Re: Odd ADIF problem with WSJTX 2.2.2
I just checked the WSJTX groups io reflector, and I see that folks have reported the error there, but there is no fix discussed yet.
73
Mike N2HTT
|
Re: Odd ADIF problem with WSJTX 2.2.2
Me TOO!
I have no clue how to fix it so hopefully the answer will come to us.
Jim
On Sunday, August 2, 2020, 8:31:16 AM PDT, Michael Aiello <n2htt.mike@...> wrote:
HI I am using Build-a-Pi 3.0.2 which installs wsjtx v 2.2.2 - having a weird problem that I have never seen before. Every time I start wsjtx it reports an error - invalid adif header - and wsjtx ignores the previously logged contacts showing every station as not previously worked. Once the program starts, stations logged during the session are recognized as worked. If I exit the program and restart, I get the error and previous contacts are forgotten.
The log files are being created in the correct (default) directory, and permissions on the flies look fine. The contents of the ADIF file also look fine.
Anyone else run into this?
Thanks & 73
Mike N2HTT
|
Odd ADIF problem with WSJTX 2.2.2
HI I am using Build-a-Pi 3.0.2 which installs wsjtx v 2.2.2 - having a weird problem that I have never seen before. Every time I start wsjtx it reports an error - invalid adif header - and wsjtx ignores the previously logged contacts showing every station as not previously worked. Once the program starts, stations logged during the session are recognized as worked. If I exit the program and restart, I get the error and previous contacts are forgotten.
The log files are being created in the correct (default) directory, and permissions on the flies look fine. The contents of the ADIF file also look fine.
Anyone else run into this?
Thanks & 73
Mike N2HTT
|
Re: Build-a-pi v3.0.3 beta
New OS installed. ?Build-A-Pi beta installed. ?GPS not functioning....think the dongle may have an issue. ?New one arriving today.
Will advise any issues.
Don KC0DE
|
Re: Build-a-pi v3.0.3 beta
OK, build OS -
done
build-a-pi beta -
done
GPS - BU353s4 -
GPS has lock, lsusb shows GPS, cgps shows GPS, Grid SQ
shows...
steve
On 8/2/20 8:04 AM, stephen shearer
wrote:
toggle quoted message
Show quoted text
I guess IF I
read the whole message...
flash a new copy of buster to an SD card, open a terminal
window and run the following:
steve
On 8/2/20 8:00 AM, stephen shearer
wrote:
after
git clone
I get
fatal: destination path 'pi-build' already exists and is not an
empty directory
should I try be trying this on a "new" OS ??
73, steve WB3LGC
On 8/1/20 11:55 AM, km4ack wrote:
Build-a-Pi 3.0.3 is nearing completion.
This version will include support for more GPS units, the
addition of Gpredict and a number of
|
Re: Build-a-pi v3.0.3 beta
I guess IF I read
the whole message...
flash a new copy of buster to an SD card, open a terminal window
and run the following:
steve
On 8/2/20 8:00 AM, stephen shearer
wrote:
toggle quoted message
Show quoted text
after
git clone
I get
fatal: destination path 'pi-build' already exists and is not an
empty directory
should I try be trying this on a "new" OS ??
73, steve WB3LGC
On 8/1/20 11:55 AM, km4ack wrote:
Build-a-Pi 3.0.3 is nearing completion.
This version will include support for more GPS units, the
addition of Gpredict and a number of
|
Re: Build-a-pi v3.0.3 beta
after
git clone
I get
fatal: destination path 'pi-build' already exists and is not an empty directory
should I try be trying this on a "new" OS ??
73, steve WB3LGC
toggle quoted message
Show quoted text
On 8/1/20 11:55 AM, km4ack wrote: Build-a-Pi 3.0.3 is nearing completion. This version will include support for more GPS units, the addition of Gpredict and a number of
|
Re: Latest Build a Pi + KX3 + signallink/Sabrent for Winlink use
Follow this!
73 de LB9EH Bj?rn?
|
Re: Pat Menu, Winlink and Ardop
Thanks Jason. That helps a lot. Now that you have narrowed things down, it will be easier for me to just focus on finding the right gateway for my rig.
|
Re: CHIRP not updating, BAP 3.0.2
You were right.? That fixed it.? Many Thanks and 73
|
Re: Pat Menu, Winlink and Ardop
You are getting no response from the gateway so I suspect band conditions are the issue and the gateway isn't hearing you. Give "auto pat" a try on 40M or 80M depending on time of day. I find them much more reliable that 20M. ? --
73, de KM4ACK
|
|
|
Re: Build-a-pi v3.0.3 beta
Will we be able to run an update script, to update?
After it's pushed to the stable branch, yes --
73, de KM4ACK
|
|
|
Re: Build-a-pi v3.0.3 beta
Will we be able to run an update script, to update?
Eric B.?
toggle quoted message
Show quoted text
On Aug 1, 2020, at 10:55 AM, km4ack <jason.oleham@...> wrote:
?Build-a-Pi 3.0.3 is nearing completion. This version will include support for more GPS units, the addition of Gpredict and a number of other improvements. The complete change log
. If you would like to test, the code can be found at but you don't follow the install directions on GitHub and run the one single command. Instead, flash a new copy of buster to an SD card, open a terminal window and run the following:
cd
git clone https://github.com/km4ack/pi-build.git
cd pi-build
git checkout dev
bash build-a-pi
--
73, de KM4ACK
|
|
|
Pat Menu, Winlink and Ardop
If someone has time in the next few days, could you take a look at the two short videos in the link below? I have not had any issues with any other digital mode, but cannot connect to a gateway with ardop and winlink. If anyone could tell me what I am doing wrong it would be appreciated. I have tried repeatedly on 20M and 40m at day and at night, and on different gateways.
One of the videos is of my desktop showing ardop and winlink, and the other is of the front of my radio during an attempt to connect to the same station a few minutes later. Any suggestions or ideas would be greatly appreciated. I am kind of at a standstill on what to do right now.
https://photos.app.goo.gl/KxJXbmUXVbuiKWBz8
Bryan/KN4EBW
|
On Sat, Aug 1, 2020 at 10:58 AM, Dreuge wrote:
one can simply use:
grep http_addr ?~/.wl2k/config.json?
Always keeping me on my toes :-) ? --
73, de KM4ACK
|
|
|
Re: Build-a-pi v3.0.3 beta
You will be able to upgrade from 3.0.2 once it's released. --
73, de KM4ACK
|
|
|
Jack Haefner, NG2E
Michael Aiello
LB9EH
Bryan Waller
km4ack
