开云体育

It's an issue with Bullseye, both 32bit and 64bit. I also let Jarret know at harms.app forum.

Thanks for investigating -- Scott K1SMK

That's right. I'm doing another SD card. The JS8CALL, and FLsuite (FLrig) did not load right. The VNC connects to my hotspot (Rogers Hotspot) on my mobile. I run the Xiegu G 90 from my portable

got it figured out. It was a dependency issue. Did FLRIG not install or can you not get it configured with your radio? -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

FLRIG shouldn't connect to the sound card (digirig). FLRIG should be configured for your radio. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack )

I don't own the G90 but check your ARDOP PTT setting in Pat Menu. Open Pat Menu->Manage Pat Winlink->Set ARDOP PTT. Select true from the drop down and finally Set PTT. -- 73, de KM4ACK YouTube (

Direwolf questions should be directed here - /g/direwolf/topics LinBPQ here - /g/bpq32/topics -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

I have had one other report of this and have created an issue ticket so I can investigate. https://github.com/km4ack/pi-build/issues/379 -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip

Here's what I have: Raspberry Pi 4, 4GB Xiegu G90 and Xiegu CE-19 CAT control board thing. So here's what I do: 1: First thing I do any time I boot up the Pi is start FLRig. I know it works fine

Thanks Jason.? I'll look into it. I appreciate your help! 73s K9KQA

*I have no idea how to fix this issue. FLrig see the Digirig ls -l /dev/serial/by-id and by dev/ttyusb0. However, it won't control the radio. JS8Call doesn't work using serial or usb0 ports.* *Lost in

After doing a reflash I did the Pi-build and thought JS8call was loaded. I could see the icon but got a desktop error. I'm reloading Pi Build and hope JS8Call works. FLrig changes vfo. I hope I don't

El 2022-02-17 07:40, Don Poaps escribió: > Update: Feb 17/2022 > I just did a fresh install and I got the same error message on this SD > card and my other one. > cd ~ > rm -rf pi-build > git clone

I am having an issue with CAT control of my uBitx xcvr. WSJT-X and JTDX work fine using the FT-817 settings. But using the same settings with FLRig I get a configuration error and no CAT control. I

On my RPI3 running BAP w/ LINbpq & direwolf - I noticed these messages on the screen -dw command today. This is my primary winlink server. My PAT winlink messages don't always go through and I was

Thanks… up and logging.

I had to run BAP twice to get JS8Ca?l to run.? I still can't get flrig to work. Paul VK2AHB

Yes, using Mumble which can also be used to do SSB remotely. Jason did a video on sitting it up a year or two ago. Another option (which I have no experience with) would be TeamViewer.

Pi 400 Latest BAP flashed onto 32g card Everything seems to be working but HAMRS. When opening it goes to full white screen then back to normal screen. Hourglass for about 15 seconds then nothing. Did

I enjoy build a pi and was looking to setup my sdr connected to the pi headless so I can remote into it from house or wherever to listen.? The issue is VNC wants a 5$ month subscription just for a