开云体育

The reboot may not be called direct with a cronjob but another script that is called may include the reboot command. Have you looked through the scripts that are called? If you want to post your

Hi Kevin, Your problem here is that, whilst Baofengs use Kenwood plugs which look like stereo ones, the wiring is slightly different. It goes like this: 2.5 mm Tip: speaker Ring: programming Shield:

Thanks for the positive thoughts. The first cable seems to be from Baofeng to Android Phone. The second I'm not sure what it's purpose is. All 3 USB sound cards have separate holes for headphones and

I use these two devices for vox. 1) BTECH APRS-K1 Cable (Audio Interface Cable) for BaoFeng, BTECH BF-F8HP, UV-82HP, UV-5X3 (APRSpro, APRSDroid, Compatible - Android, iOS)

Greetings, all: I am having issues trying to get anything to set up with my Baofeng UV5RAs and USB sound cards. I think I could get software to work, once I am past this first hurdle. I have

UCTRONICS Complete Ultimate Raspberry Pi Rack Mount Enclosure with PoE Functionality, Front Removable 19" 1U Rack Mount with Thumbscrews, Supports Up to 5 RPis

My Pi 3b is rebooting every night at midnight. I would like to turn that off. There is nothing in crontab about rebooting. My question is, where else can I look in the Pi to find the script that is

Graham, on a rpi 4? Frank

OK I just discovered something that might help. First by way of background. I have two nearly identical BAP setups. Here is what I have: What is common to both setups FT-857D LDG autotuner - Uses CAT

I just figured something out with packet not working on 2 meters. By way of background, I have two mostly identical setups. One is my "go frame" and the second is a permanent install in my Jeep. What

Frank,I had a simular problem and what I did to resolve it was to increase the "swap mem" on the raspberry pi from 100 to 500 .?GrahamVK4GRASent from Samsung tablet.

I use velcro to mount my Pi to the side of my gobox. I also use velcro to mount my signal links and 12v usb plug. I have a slide out shelf that I use for the bluetooth keyboard and mouse. I have a 12"

I am building two Go Boxes based on the Pi and BAP - one HF and one VHF/UHF. The boxes are the Gator 4U (VHF/UHF) and might need 6U for HF. I am trying to keep weight down by no using shelves. I got

Ok. That worked for ardop. At least the radio keyed. I was unable to make a connection at the time to my station of choice. Packet still doesn't work on 2 meters. The radio will not key.Wally K7TUK

still I can not get wsjtx installed, I have replaced the line in the additional nfunction file, then running install from BAP, Im sorry but I might miss the obvious next step, but I think I will wait

Open Pat menu and click on Manage Pat Winlink->Set ARDOP PTT. Set this to true. Also in Pat Menu setting, verify that you have rig control set to "yes" -- 73, de KM4ACK YouTube (

Here's the results of the listing.? I added a listing of the GridTracker folder. pi@raspberrypi:~ $ cd ~ pi@raspberrypi:~ $ ls ardop??????????????????????? Bookshelf?????

Hi and happy new year to everyone, I flashed a new 64 card for my v4 and i am installing again what I need from BAP. Will come back with issues if any. This time I did not choose HS since I will use a

Thanks for the tip on running wsjtx from the cmd line.? Yep, I am getting segment faults also.? Running a Pi3B with 1 GB of memory.? Also on this build FLRig is v 1.4.4 and has added and "Extra

You can run wsjtx from command line and you'll see the error there when it crashes... Or run it using gdb debugger. Mine is also back to crashing... Andrew, K1YMI [email protected]> wrote: