开云体育

Thanks.

My Pi is offline right now. I just used the script to load the Bluetooth tnc3. In the Pat Menu screen I remember Beta Mobilink tnc. I click on that and it loads RFcomm etc. If I remember correctly Pat

Would you be willing to share your setup?? I keep getting an error "cannot access /tmp/kisstnc", no such file or directory. I used Jason's mobilink script and his wl2k_gateway.setup scripts.? Not

I've used my Mobilink TNC 3 for Winlink and APRS. I followed the early version of Pat Winlink KM4ACK Build a Pi. It works. I used it with my Kenwood D 710 and V 71. 73 Don va7dgp/va7qu *Don PoapsNew

Wondering if I can use a mobilinkd tnc3 and wonder if it can be used instead of a signalink?

Unfortunately, Pulse ties the settings to PID and not to a particular file. These settings may possibly work if you can get your application to run under the same process ID, but I wouldn’t hold my

One piece if software I would like to see included in BAP is terminator.? If you are not familiar with this, it is a terminal program that you can split into up to four screens one on tab.? Very

I set load-module module-stream-restore restore_device=true instead of false and rebooted the pi. Interestingly the first time I loaded JS8call the volume setting was in the acceptable range but when

I find this stanza in /etc/pulse/default.pa ### Automatically restore the volume of streams and devices load-module module-device-restore load-module module-stream-restore restore_device=false

I have just installed a fresh version of Bullseye and BAP. All seems to work fine and displays properly except for wsjt. FLdigi is sized properly but wsjt is too large for me to display the

Thanks for the information, so I will stay on BAP 3.1.3 on buster until cqrlog will be available with BAP 3.2.x as cqrlog is essential for me. 73 de Klaus DC2JR Von meinem iPhone gesendet

Build a Pi builds the latest version of hamlib from source. Installing CQRlog with apt also installs an old version of hamlib which causes a conflict with the version built from source. This is why

The values for bandwidth and PTT can be set in Pat Menu as well. Open Pat Menu -> Manage Pat Winlink Set ARDOP PTT - True/False Set ARDOP Speed - 200/500/1000/2000 The address was changed to 127.0.0.1

This has annoyed me for ages and I have yet to find a good solution. Like you, I reset the volume each time I open JS8/FT8. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

Hi Daff, Thanks. I followed your description 1:1. Removed Raspberrys hamlib and compiled hamlib from source. Wanted to have the most fresh version of hamlib. 73 Patrik

I use a pi for JS8CAll quite a bit. Each time js8 call runs pulse audio has reset the volume to 100 percent and my waterfall level indicator redlines. I have to go into pavu control and set the volume

Hello Patrik, Can you type the exact commands when you try to build js8call? Did you compile hamlib from source or rely on Bullseye's package? -- 73 Daff, LZ1DAF

Hi, I just ran this the same problem my new FTdx10 and a fresh install of BAP. ? From the last message, it was not clear what the fix was until I compared my config.json to Terry's configs values.

Hi together, yesterday I build up a new system based on Bullseye and BAP 3.2.0 and on the 1st view it looks fine, but on the 2nd view there are several issues in the moment. * the remote performance

Hi there Dafcho, Thank you for this post. Very clear to follow the steps. I have problems with js8call and my FT-817. Think that the errors most probably have to do with hamlib, they could maybe be