开云体育

Lots of different power supplies.? Ones like the official Raspberry Pi and USB power cubes of different manufacturers and amperages.? This obviously only works with power supplies that have a USB

I believe you have a couple places that need inspection, mainly it looks like there is no rig definition.? ? From an Ardop speed perspective, Ardop is like an old dial up internet modem.? The

Here is my config.json.? ?Also my quick stats are ARDOP Speed = 500, I have set this to 2000 with same results, ARDOP PTT is True, Listen Modes is ardop, Rig Control is yes, Pat Port is 5000. {

Morning Vic. I've ordered a pi-zero and the banana pi isn't available until mid September here in France -- so I'll try the pi zero first. 73 Bruce G4ABX

Jim Can you post a copy of your config? Be sure to blank out your winlink password which is near the top of the file. Terry

Hi, as I had problems with gps after updating BAP 3.0.7 to 3.0.8 (no satellites are found) I just build up a new system with Bap 3.0.8 to check, if the gps problems are still there with a new

JayvSheepdog, is it possible to solder a power pole connector to the bottom of the MakerFocus DockerPi hat barrel connector without using the barrel jack. Thanks in advance Echodelta10 KE8EZA

Since latest bap i found same issue. If i close pat and restart then it works. Icom7100. Greetings from the Namib Pieter Jacobs V51pj

I think I'm getting closer to unraveling the mystery.? From inside of the Pat Mailbox when trying to connect to a gateway, it puts a line through the frequency and says "Rig Control is not configured

It work for me? Running 24/7 on bap latestand rpi4b 8gb Greetings from the Namib Pieter Jacobs V51pj

Well, that's a bummer about JTDX.? I really like the program. I don't believe it is an RFI problem.? Everything was working fine prior to updating to 3.08.? I've already done what I can to mitigate

Which "Power supplies" are you using, as I am having the same issue Jason-KB8SRX Sent: Monday, August 09, 2021 at 8:29 PM From: "Dave Christensen" <dkc2030@...> To: [email protected] Subject:

Most of my power supplies for my Pi3B, including the official Raspberry Pi power supply were giving me a low voltage warning and the measured voltage out of the Pi3B was about 4.6V. I had to use an

Wheez, Thank you for that information. I greatly appreciate the fact that you and others are working on trying to get RMS Express and VARA to work on ARM processors. I am most interested in VARA on

/g/KM4ACK-Pi/files There is a File section in the group.io area. FYI 73 *Don PoapsNew Westminster, BC*VA7DGP DATA VA7QU VOICE *Winlink: va7qu@...

I had the same problem today and I was bored so I wrote the attached script to troubleshoot. In the end, running gpsupdate (from /home/bin/ ) solved my problem, I believe. I don't know how to paste

Bob, Look at my post of #4743 and related posts. It may help. Les WD5BYQ

Greetings, I had HAMRS app installed prior to doing the Build A Pi upgrade to 3.0.8, it worked prior. Now when I go to the Raspberry icon to select the HAMRS app in Hamradio menu, I keep getting the

Jim, There is two different files / controls in play here.? FLRIG and ARDOP.? It sounds like you have chosen a path many of us have in which FL Rig is your interface to the radio for applications.?

Okay, on Pat Mailbox status screen, I’m getting an Unable to set PTT rig ‘’; not defined or loaded. ?Any idea where I should go to update this value? ? Flrig controls the radio, so unless