开云体育

Update to the latest version of Vara https://youtu.be/zxEeJZctKaE -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter (

Let me elaborate on my setup a bit to avoid any unnecessary back and forth. Rig is setup for DIG mode on USB with 1200 speed.? Using a signalink into the DATA port, and rig control into the ACC port

Hi.? I searched the archive and did not find an answer.? Probably in there somewhere.? I need help. Have worked through all the setups and have ability to Tx on vara hf with my FT897 using

Great, I am glad it worked for you.

Yes, I found the answer in that thread.? Thank you Kyle.? Here is what the problem was for me: *Hi Bobby,* *I had the same issue. What I found in my case using Linux Mint was in Pat menu under

Jim, take a look at this thread. It may be a similar issue. /g/KM4ACK-Pi/topic/pat_connection_fails_unable/110573624 [email protected]> wrote:

I'm getting the same error.... FLRIG works and can read the FT-817 freq, I can key the radio, I get traffic in the vara hf waterfall, etc etc Just keep getting the "QSY failed: unable to get rig

Not yet. I am using Vara HF. I have not taken a time to reinstall it again an try again.

Typically you press the tab key on the keyboard to highlight ok and the enter key to confirm your selection. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

Did you ever resolve this? I'm having the same issue.

I get to this screen and can not get past it. ?I can't click the OK, can't hit enter, can't move a text cursor. ?How do I get past this screen??? System is Linux Mint (as you can see partially

So far I’ve spent quite a few hours over the course of 2 days on this and still not to where I want to be with the screen resolution. I may have to cut my losses on this. I don’t mind timkering,

Worked like a charm. Thank You

Couldn't really make sense of the posts in the linked 2022 thread as I didn't want images or think significant changes should be needed just get rid of the boxes. They appear to be caused by a stray

Considering it is a TV, it could be an overscan issue. Sometimes you can change a setting on the TV to fix it. RPi has (used to have?) a setting (

HamClock only offers a few resolutions. Check out #11 of the FAQ on the HamClock page https://www.clearskyinstitute.com/ham/HamClock/ -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar

The script in the link is different, so do I have to replace the entire script with the newer one?

Update: I just tried a fresh install of Raspberry Pi RPI 32 OS and it works. Looking forward to x64 support on Pi. For now I guess I will have to boot from that card to use Pat.

Yes the rig control will QSY to any station I select within the Pat mailbox. I do have rig control enabled in the PAT Menu config.

Bobby, I am using Linux Mint on a desktop PC. I figured my config would be different from yours. So when you select a station does your frequency change to that selected station. I am