开云体育

Also for full disclosure I used the Back up micro SD card that I had for the Pi 4 2GB with BAP in the new Pi 4 4GB. Everything came up and is working great in BAP and I have even been able to use

Thanks for the quick reply. This is what I am receiving when I run that command. ls: Can not Access 'ls /dev/serial/by-id' : No such file or directory 73, Frank W4FRR

What do you get if you run: ls /dev/serial/by-id -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) | Store (

I am running an IC-7100 using the USB cable direct into a new Pi 4 4GB. I have run the updates and upgrades as well as updated BAP. When I look with lsusb I can see everything else that I have plugged

Has anybody successfully put BAP on a laptop?

Perfect Kevin, I'll comment out the original code and replace w/ second line and then when going to the field, I'll reverse the process. Thanks very much! Rich KQ9L

A couple of ways: modify the line in /home/[user]/.conkyrc: Change ${font Arial:bold:size=18}${color White}Gridsquare ${alignr}${color Yellow}${execi 25 cat? /run/user/1000/gridinfo.txt} to ${font

Is there anyway to have Conky display a "static" gridsquare? By this I mean one that is manually entered vs obtained via GPS. I use my BAP both in the shack and portable. In the shack I don't use the

Use the Build a Pi update tool to update to the latest stable version (2.9.0) of Pat Menu and you will have the quick stats button. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

Glad it's working. Still not sure why BAP didn't detect the 64bit system to begin with. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter (

Try updating your FLRIG to latest version. The latest version supports G90 along with more advanced controls such as the inbuilt antenna tuner. See attached screenshot that works for me using ARDOP

Thanks KM4ACK for your response. However, i do not see 'Quick Stats' on my Pat Menu. See attached. Is the 'Quick Stats' only a CLI option or something? As you can see i am running version 2.2.2

Yes! :5000 worked!

I removed the sym link and ran the commands you listed. ARDOP modem now starts. Thanks Jason, 73, George, AK4NG

Eric, You could run Packet Winlink or APRS (with a GPS) with a sound card but there is no way for rig control like changing frequencies etc... 73 -Mike

Yes I saw it thanks. KO4NCC

Hi all I have Pat working with ARDOP and can connect to a node, but nothing in my outbox sends, just ACK signals back and forth and eventually the connection disconnects.? ?Is there a trick to

I would try running the three commands and see if that clears it up. You will probably want to delete the sym link you created first. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar

Easiest way to update Pat Menu is to use the Build a Pi update tool. To figure o

You need to turn off rig control in the pat menu setting so that Pat will not look for FLRIG when you start a modem. I created a separate config file in Pat Menu for the mobilinkd TNC since it doesn't