开云体育

Greetings. I tried a fresh install today of the latest build on my RPi3 and it got to "dialogs/fldigi-confdialog.o" line and then just stopped. The system didn't crash but became very unresponsive

Hi Bill, what GPS dongle do you have? Are you inside or outside? The NO GPS status is a normal result "if" the gps donlge isn't plugged in or it isn't recognized. Are you familiar with running

Understood Jason. But -- hey, experimentation is what this hobby is all about :-) If we didn't go 'off piste' occasionally, life would become very boring. I'm just grateful that you found the time and

I have a new install on a 8G 4B in a M.2 case, from your YouTube. ?I only loaded the Fldigi suite and the GPS. ?The Gridsquare says NO GPS. ?How do I diagnose this pbm?

One way to add 80M to a 40M EFHW without changing 40M and up, and without making the antenna twice as long is to add a loading coil and a short length of wire that tunes 80 meters. This coil

Will, The design allows for using whatever length wire you would like so I would say try it out! Jay 73 de N0SR

I wonder if there is value to putting a choice to delete the download/install directories if the install script sees the directory for a future update? That way if someone has an issue, reinstalling

Hi Tom I got one but it took three attempts, they do go quick, as soon as I got a notice of availability I got on an ordered it. I haven't had a chance to use it yet, but look forward to it. I will

80M would be possible with a longer wire (~132') but may cause the SWR on some of the other bands to exceed 2:1. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

Edit your axports file and remove all but one of the wl2k entries and don't leave any blank lines at the end of the file. In the direwolf.conf file, comment out or remove the line you added. Then

Just remember that BAP is always going to show you need an update for FLDIGI. Don't try to update FLDIGI through BAP. Something things may load and work as expected. Others like FLDIGI may have a

Hi Vic Very simple: sudo apt install fldigi It installed and runs. Now I have to figure out how to extend the zero's USB ports so I have at lease 2 to connect my KX3 Sound Card and Serial link. By the

What commands allowed Fldigi to load on the Pi-zero, Bruce? I would be interested in doing that on mine. And I used BAP on my Pi-zero, Jason, with no problems, but I only loaded a very few programs

Thanks for the report Dave. I'll see if I can reproduce it on my test box here. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter (

Thanks. I’ll pass this along. Les

He should be able to restart the script with: *bash ~/pi-build/build-a-pi * If that fails, he could try deleting the build a pi directory with: *rm -rf ~/pi-build* and then following the directions

I'll look into this and see if it is possible. https://github.com/km4ack/patmenu2/issues/30 -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter (

He apparently downloaded once, but something happened in the install and says he could not download it again. Les

You only download it once and install what you want. After that, use the Build a Pi update tool to install additional apps. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar (

Have a ham friend who downloaded Build-a-Pi and was doing it wirelessly, which I have done at three times. But now he says he cannot download BAP again. Supposedly he could only do it once. I have