开云体育

Nigel, Is your user still pi? Are you auto logging in on boot? Current version 3.0.2 won't start Conky if you don't auto log in. This will be fixed in 3.0.3.

Jason, much appreciated. I have some 64gb sd cards that should be here Tomorrow. I think I am going to experiment with some different programs and have a spare that is flashed with just the

So, now that we know that CrossOver can install RMS Express and VARA and play audio out of the Pi (I haven't tested over-the-air connections yet), I've been trying to get away from relying on

Hi All, The first time I used Build-a-Pi (V2) I found that a complex Home wifi password can cause the Build-a-Pi script to fail an only complete a partial install.? I believe this was because the

Great. Ordered. I'll post results when I get it set up. Thanks again! J. *Jeremy LeRay* *New Bern Web Design, LLC* 315 Metcalf Street New Bern, NC 28562 newbernwebdesign.com

Works for me. I drilled some holes in the top for more ventilation. ________________________________ Sent: Tuesday, July 21, 2020 10:01:44 AM To: [email protected] <[email protected]> Subject: Re:

Thanks Dwayne. I'll give that one a try. Looks like it has lots of options. J. *Jeremy LeRay* *New Bern Web Design, LLC* 315 Metcalf Street New Bern, NC 28562 newbernwebdesign.com

https://www.amazon.com/HiFiBerry-HighPi-Raspberry-Pi-Case/dp/B07VNSNMVX/ref=mp_s_a_1_5?dchild=1&keywords=HiFiBerry&qid=1595339774&sr=8-5 ________________________________ Sent: Tuesday, July 21, 2020

2.2.2 has issues with fast decode in addition to other problems on windows, had to roll back to previous version. Suggested fix in windows was to not use fast and disable AP.

It was time to make a fresh build so I set up 3.02 from scratch. Build ran OK overnight. Only thing I noticed Conky not starting automatically, needs to be run from command line. 73 Nigel M0NDE

I guess this is more of a hardware question so I hope it's OK here. ?I bought the power board that Jason recommended in one of his videos. Doesn't fit with my Cana kit case. Is there a better option

That document is a bit dated now. As soon as I can find time, I will update. The day job has me super busy for the next couple of weeks. Have you taken a look at

I was able to use the Mobilinkd config app on an android tablet to change the tx delay setting. I think that worked. One connection with a 1200 baud node completed, but that was the only one. I think

Doing a manual build. Using the commands you have in your build notes

Should be line 69 in the direwolf.conf file. -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter ( https://twitter.com/km4ack ) | Store (

Ryan, Have you checked the mobilinkd settings to see if a delay can be set? You might want to ask Rob (Mobilinkd developer) if it's possible. /g/mobilinkd/topics -- 73, de

Are you doing a manual build or using build a pi? https://youtu.be/l4M9VVqGxoc -- 73, de KM4ACK YouTube ( https://youtube.com/km4ack ) | Tip Jar ( https://www.paypal.me/km4ack ) Twitter (

Mark, I haven't had RFI issues with the original ones I ordered. I have ordered another batch to test as well. I don't use those buck convertors often as I have moved my systems to this hat

If you don't want to wait for the slow boat from China, Here is a bigger selection, good prices and from a domestic supplier who I get all my batteries from for my Model

Dave, Now is a good time to grab the board off of Amazon if you want one. It is currently almost 30% off.