Re: Winlink Gateway -> DINAH and Direwolf
|
G¡¯day Jason,
?
Thanks for the reply, I¡¯ll try again with rigctl and have another look in
the Direwolf group ¨C I did some searching without finding an obvious solution so
will post direct and see if a solution presents.
?
73 Steve VK2ARS
toggle quoted message
Show quoted text
From: km4ack
Sent: Thursday, January 20, 2022 12:24 AM
Subject: Re: [KM4ACK-Pi] Winlink Gateway -> DINAH and
Direwolf
Hey
Steve, I don't have one if the DINAH sound cards to test with. I believe
you would only need to get the PTT line configured in direwolf for the card. You
might ask in the direwolf forum /g/direwolf/topics and see if
anyone there might be able to point you in a good direction. One thing that you
will need installed that I didn't use in the Winlink gateway video is hamlib
(rigctl). If you didn't install it the first time before installing direwolf,
you will need to reinstall both so that direwolf is compiled with rigctl. Please
understand this is an educated guess since I don't have the sound card here to
test with. --
73, de KM4ACK
|
|
|
