G¡¯day Jason (and the group)!
?
I¡¯ve been following BAP and your videos for a while and your video on the Winlink Gateway really caught my attention as it was something I¡¯ve been wanting to do for quite a while as there are not many gateways in VK and I wanted to change that.
?
Your video from December ¡°Winlink Gateway on a Raspberry Pi LinBPQ¡± was exactly what I was looking for, it went exactly as you depicted it, it is so nice when a project works out of the box so to speak!
?
My only issue is that I don¡¯t have a Signal Link (very expensive and difficult to source in Australia) so would like to use my DINAH interface () instead.
?
I¡¯ve read the docs, I get the impression that if I added ¡°PTT CM108¡± to direwolf.conf I should be ok.....
?
Sadly that did not work so I¡¯m throwing it out there seeking guidance from the experts on how to get the DINAH to transmit under Direwolf.
?
73 Steve VK2ARS
Hey Steve,
I don't have one if the DINAH sound cards to test with. I believe you would only need to get the PTT line configured in direwolf for the card. You might ask in the direwolf forum
/g/direwolf/topics and see if anyone there might be able to point you in a good direction. One thing that you will need installed that I didn't use in the Winlink gateway video is hamlib (rigctl). If you didn't install it the first time before installing direwolf, you will need to reinstall both so that direwolf is compiled with rigctl. Please understand this is an educated guess since I don't have the sound card here to test with.
--
73, de KM4ACK
|
|
km4ack