Don,
You are correct. There is an additional download from UZ7HO for PTT.
My sound card works just fine with my PC.
The Direwolf manual says the Master¡¯s Communication card should work.
Quote from the manual.
Commercial products:
? DINAH
? DMK URI
? RB-USB RIM
? RA-35
There may be an addition PTT file for Linux, but I have not seen it. I am attempting the install on a Raspberry Pi 3
Les
toggle quoted message
Show quoted text
On Jun 17, 2021, at 10:54 AM, Don Poaps <
va7dgp@...> wrote:
I'm a Window Guy. This may help. UZ7HO has developed ptt.dll to be
downloaded so his program with work with Winlink Express. In the
Device setting under PTT, ?connect to ptt in the menu
I don't think Diewolf has that ability?
73
Don
Don Poaps
New Westminster, BC
VA7DGP DATA
VA7QU ??VOICE
Winlink:
va7qu@...Subject://wl2kALLSTAR ?530780
HH# 5971
HH# 11384
Alberta Mesh# 5404
On Thu, Jun 17, 2021 at 8:45 AM Leslie Loftin <leslieloftin47@...> wrote:
Done some work on trying to solve the PTT part of Direwolf.
Somewhat similar error now, but can't get it resolved.
ERROR can't open device /dev/ttyUSB0 for channel 0 PTT control.
No such file or directory
Direwolf and Xastir are receiving just fine. I can see messages being sent to the radio and even the data over the speaker.
Data posts on Direwolf, but the radio never goes into transmit.
Again the sound card is a Master's Communication DRA30, which the Direwolf manual says is supported.
Les
WD5BYQ
