Re: HOWTO digipeat with Mobilinkd TNC3 and RPi Zero 2W?
|
Not sure how useful they are but there are a couple of APRS command line tools on github that may be?useful, you'd probably also need to pair them with Direwolf.
ewpratten/aprs-bcn: Command-line tool for sending out APRS-IS beacons
chickadee | F# for APRS (ham radio)
and possibly delqn/aprs_client: APRS packet parsing and ingestion tools.
But I think that has other dependencies which you will need to satisfy.??
I was only aware of them as I was considering the pi zero route but was gifted an pi 3b+ when a friend was upgrading so didn't need to go there.
Best of luck, I would love to know if you come up with a good solution as a pi zero should make for a simple low power feild deployment.
Neil
Neil Wilson? VK3IG
I was inspired by the video "Portable Digipeater Build with a Pi Zero 2 W" to build my own portable digipeater, but I want to use a Mobilinkd TNC3 rather than the Digirig for the interface to the radio. The videos that I find on the web all use GUI clients (YACC, Xastir) to set up a digipeater with the Mobilinkd TNC3. Is there a non-GUI APRS client that can be used to build a digipeater with a Pi Zero 2 W and a Mobilinkd TNC3?
?
Tnx,
John WX0M
|
