Kelly wrote:
if you set the line in direwolf config to?PTT RIG 4 localhost:12345
launch flrig
launch direwolf
is this fixing the problem?
========================
No, same errors. ?I commented out:
# PTT RIG 2 localhost:4235 ? ? ? ? ? ?(this was from Jason¡¯s IC-705 videos¡)
¡and added this line below it:
PTT RIG 4 ?localhost:12345Then when I open flrig, it connects to the radio and Conky reports ¡°FLRIG ACTIVE¡±
Then when I open Direwolf from the Hamradio menu, it says:
? ? ? Audio device for both receive and transmit: plughw:3,0 (channel 0)? ? ? Channel 0: 1200 baud, AFSK 1200 & 2200 Hz, A+, 44100sample rate / 3 [ in green text ]? ? ? Hamlib determined CAT control serial port rate of 0.? ? ? Ready to accept AGW client application 0 on port 8000 ¡? ? ? Ready to accept KISS TCP client application on port 8001 ¡Conky reports DIREWOLF ACTIVE
But then, when I open the pat mailbox in Chromium, I get the same QSY failure message as before:
? ? ? Unable to get frequency from rig my-rig: dial tcp 127.0.0.1:4532 connect connection refused.
So I opened Pat Menu to try to test VARA HF. When I clicked ¡°Stop Modems¡± and then ¡°Start VARA Modem (BETA)¡±, I got an error, ¡°It looks like direwolf is running. Stop all modems and try again¡± :
So I want back to the direwolf terminal window and did CONTROL-C to stop direwolf. Then when I clicked ¡°Start VARA Modem (BETA)¡±, it started up pat mailbox in chromium, but with the same QSY error when I tried to connect with packet:
? ? ? Unable to get frequency from rig my-rig: dial tcp 127.0.0.1:4532 connect connection refused.
Interestingly, the flrig window showed that it was still connected to the radio at the correct frequency, but pat mailbox was not able to set the new frequency in flrig.
It seems the problem is between pat winlink and flrig ¡ª they aren¡¯t playing well with each other.
Why did you have me change direwolf.conf ?to?
PTT RIG 4 ?localhost:12345 from Jason¡¯s
PTT RIG 2 localhost:4235 ? It didn¡¯t seem to change anything¡
Rob ? KK6JNI
Rob Johnson KK6JNI