开云体育

Hi Frank This is a perfect mast. Good length and dimensions. A wing mast section never is going thinner on the top. Buy it Cheers Bernd

Hi Domenico Good job! Will you glue the sail locker floor between BH 1 and 2 now or after turning the hulls? How about the floor of the aft deck near the transoms? Cheers Patrick

Hi Bernd, the plans of DUO 660 shows a mast from 2 pieces. But they will be glued. I have got an offer, but a little bit different: One-piece carbon mast -tube 100/105.5mm length 8100 without

It s alway good to see your progress Lot of good work and very fast Thanks to share And have good rest! Envoyé depuis mon appareil

Yeah, Domenico your the man. Wow! Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows Sent: Saturday, October 30, 2021 6:59 AM To:

Hi Domenico you can work, what progress Great Chiao Bernd

Hi Bernd After the first 12 days of work, placed the BHs on the track and I finished putting all the douglas strips. Now a short break and then we start again. Bye Link foto

Hi Patrick nice to hear your works are going well. Yes there is an extra bulkhead between the BH4 and BH 5 that I had put on the first KD 122. Putting it now is easier as you know.

Hi Domenico Bulkheads look good. Good work. Is there an extra bulkhead on both sides? I will try to finish my Voyager before you finish this one! We are trying to finish glassing the outside before

Yes Bernd the boat will be completely completed in this shed which is located 300M from the sea. In addition to the climate that in southern Italy makes the difference for example today at 11 in the

Hi Domenico You are, as expected :-)) made a quick start. You will build in this room too? Ciao Bernd

Hi Bernd I have opened a new photo gallery on the second construction of the KD 122 Italy In three days I prepared the bineraio and hand-cut all the BHs from the offset table. Here the link

Hi Holger You got the hoax, sorry about that. Nice to see your progress Nice that you had an old-fashioned launch. I love it. With fire hose boat. I believe you that it was a great moment And

Sorry, a mix up. You are still working on the boat Cheers (too many I am afraid Bernd

Hallo Bernd, sorry I didn't send photos it must be Holgers Stapellauf. My build stucked for more than 3 months because I got a lumbar disk herniation which was very painful and prevented me from

Dear Bernd and all, just added some photos to my album ( /g/K-designs-Multihull-Sailboats/album?id=131678 ). A lot of progress has been going on this summer. First the roof was built

Hallo Guenter Thank you for the big photo series. Congratulation?on the old-fashioned "stabellauf" photo. She floats perfect Getting to a new workspace? As always, the devil is in the details,

Hi Domenico Nice to hear that you have started your second KD 122. Nice temperature to work. By the way, here it would be also not bad at still 22 degrees Good to get new input. I have the feeling

Hi Bernd I started the second construction of the KD 122 in southern Italy. Today October 19th I started with a temperature of 26 degrees. It is much warmer than where I live in this period, I would

Many times I am asked for wood suppliers for boat building. Here is a list of wood suppliers in America. Here is the link https://mailchi.mp/84df7b69f634/wood-suppliers (