开云体育

So far I have purchased 4 different sets of plans from you. The Eco 5.5,Eco 6.0, little tri and the 480. I have decided to build the 480 due to the oversized trailer and material cost. The type of

Difficult to answer in writing. I will try. For high on the wind, the opening angle should be 7 degrees. The jib sheet angle to the sheave has to be 45 degrees. The angle of the trailing edge. These

Hi Jack Thank you for your quick response. Good to hear that you used/use the Covid situation to speed your work on the boat. Not so good that your business went out of operation. Do you get some

Hi Bernd, Covid 19 helpt me to speed up the build of the extended ECO 75 catamaran ( electric ECO 85 ) which I'm building. This because we spend holidays at home, where I build every morning till 12

Hello every one. Need an advice on jib tracks placement . I am thinking to have a 110% jib, My tracks are 1.2 meter long. Regards Vlad.

COVID-19 affects also us going on with our project. Many restrictions in almost all countries around the world. Shops closed to buy materials. The material out of stock. Curve's, so you can not go to

Bernd in February I called a company in northern Italy who told me that they produce pipes of all sizes up to a maximum of 250mm in diameter, in a week they would arrive. I called last week and in 7

Hi Domenico Great, so strange, here in France I have problems getting Aluminiumtubes.You in your time frame? Cheers Bernd

Hi Bernd finally the tubes to connect the two hulls of the Duo 900 have arrived They are 6.0m long and 180mm long and 5mm thick. Also 100mm and 5mm thick Bye

Hi Bernd The continuously curved deckhouse walls worked out well. I like them. The angles of the forward part of the roof and the middle part of the roof are close to the original. We built the roof

Hi Patrick Thanks for the photos. The deckhouse looks special but good.I like also the aft beam. Cheers Bernd

The following photos have been uploaded to the D.R. Voyager Build ( /g/K-designs-Multihull-Sailboats/album?id=140477 ) album of the [email protected] group. *

This might be the model that may work with wheel chair and handicap passengers. I have to see if the people at Shake-a-leg in Mismi are interested. Could be a good summer project for the kids to build

Hello Patrick Thank you reporting the mistake. I will correct it after this mail here https://paypal.me/ikarus342000?locale.x=en_US The tabernacle is shown in the study plan.To the sails, no specific

Le samedi 22 mai 2021, 18:00:37 UTC+1, <patrick.gilman.56@...> a écrit : Good day, I’m intrigued by the Eco 520 and have added it to the mix of possibilities for next winter’s project. Will

Want to take a look at these study plans but the payment link is not working. Thank you. Sent: Sunday, May 30, 2021 9:19 AM To: [email protected] Subject: Re:

Ciao Jack Yes, but I'll make a cover that protects from the sun until the two hulls are painted.

After many requests I made a study plan for the ECO 520. To order go to https://www.ikarus342000.com/ECO520page2 Bernd

Chia Domenico Looks good, but only one month to finish the boat? I know you work fast, but this will be difficult. Success Bernd

Nice job, and great progress! Do you plan to finish the boat outside? Regards, Jack