开云体育

Pepijn answered your question already. By the way. The pictures and the videos for the CATAPROA were all made at the place of Pepijn. Sailing was done on the Ijsselmeer. The others were made on the

Cataproa is the way to go. Quick to build, option for insulation a bit. All the shelter you need. Just do keep the weight down

Apologies for the long post in advance. Hi guys, it's been a while since I was last here. At the time I was looking to build a small live-aboard. That plan fell through because I found a super cheap

You can use Vinilester on the inside. But in contrast to Epoxy it will not add to the strength of the hulls.

Thank you for the explanation.

Thank you for answering so quickly. Here the epoxy is very expensive. Too expensive. Use the epoxy only on the external faces of hulls, beams, etc. But not inside the interior of the living work. Here

No aircraft with winglets could then fly through a turbulence. Because the a-vortex panels do the same thing, only through a 830 times more tense element. Bernd

Hi Petro What do you mean by that??Here the list of materials Cheers Bernd | | Sans virus.www.avast.com |

Yes, I have the plans. I will be sailing mostly in the Gulf of Mexico and the Caribbean. I was not sure if the anti vortex panels would word in the choppy sea conditions.

hello Bernd To make the KD860 open catamaran, what is the minimum essential that can be used in epoxy (hulls, beams etc). Thanks. Pedro hola Bernd para hacer el catamaran KD860 open, cuanto es lo

Domenico You need the diamond shrouds. Otherwise, you get buckling of the masts. Bernd

Hi Patrick You have a plan of the KD 860? I have the center board drawing. But you do not need it. Ask owners of the KD 860. The anti vortex panels work perfect. Bernd

Hi Hans on the top top must have some flexibility At 8.70 MT above there will be (either side) two dynema cables ahead and behind at 2.80 MT from the base of the mast. This is to avoid creating

Hello, In the study plans it shows a center dagger board option. The full plans do not show it. Are there plans available for its construction? Finally get to begin building this summer. Thank you.

Hi Richard, Very sad to hear that you have to stop your project because of your health, I whish you al the best! Kind regards, Jack -----Oorspronkelijk bericht----- Van:

Hi Stanko , Yes still available where are you from ? Olivier Olivier BOULARD SAS ERPACC 13 RUE DES GAUZYS ZI DE BEL AIR 89400 CHENY 0386479964

Very impressive and professional!? Will there be an "endcap" on the top against twisting? Or is it supposed to have flex? Greetings, Hans

Hi Domenico Nice progress with the A-frame mast. Welding Aluminium is not easy. But the shown weld is perfect. Ciao Bernd

Hello Richard I am sorry to hear that you have health issues. I wish you first a quick recovery. Furthermore, I hope you will find a buyer. You did a great job, as can be seen on your pictures. I wish

link foto /g/K-designs-Multihull-Sailboats/album?p=Taken%2C%2C%2C20%2C1%2C220%2C0&jump=1&id=269251