开云体育

I think you put it well, Andrew. Zee built a 50 footer, I believe. So he knows how. Transom hung rudder boxes are tricky for anyone, though. If I was putting tillers on mine, I would do the glass wrap

I have been following the rather heated exchange regarding plan detail for Zee's catamaran. Like others I would like to also express my support and appreciation for Bernd and his designs. I am

Hi Milko If I understand you correctly, do you want to install a genoa from the top of the mast? If so, please use a short tangon, bowsprit, length about 1 m from the forebeam. What do you mean with

Hi Alain. I am reluctant to comment on this topic, however in my opinion all parties includiding Zee have valid points. Obviously Zee is extremely frustrated and not been able to get the information

Hello Bernd!I put the mast with wishbone on my Kd 860 and now I'm going to have the sails made.I saw from the project that the genoa is 10 m long and I ask if it would be appropriate to make it longer

Here you are, you are an engineer and you understand what kinds of projects. I am a shipwright not an engineer and I am hardly know normal autocad .... I'm sorry for Zee he had done a great job and I

I would like to also chip in here in case other prospective builders are getting negative feelings about Bernd's boats. Yes his plans are very economical. They have a lot of instruction attached when

I want to react to this post because its tone is quite an exception in all I have read so far on this forum. It could have got me really worried as I am going to embark in that long project of

this is the toilet I made for my trimaran, to fit under the cockpit floor. It has a urine separator and 2 tanks for solids and liquids, the last one I empty daily while sailing, that's the one that

Hi Stefano, I agree with your message. This is a forum and could have had all the support from me and all of you too. Certainly Bernd's plans are cheap for this I have bought over the years: KD860, KD

Hi David, It makes a lot of sense. Thank you very much for the detailed explanations and the photo.

Hello Alain, One of the hassles with the Airhead toilet was having to empty the attached urine container on a daily basis. It is surprising how quickly an 8 liter container can fill up with 3

hi to all great respond Bernd ,Zee if you whant real Professional building plan be ready to pay a arm and a leg for it ,i am civil ingenior and yes plan from Bernd have some mistake some parts are

I understand you are mad. Is your good right. But as mentioned, it is not my mistake that you can not get my replays. I attached here the rudder housing drawing. Unusual, but I do not see another way.

Hi David I also want to use a dry/compost toilet on my boat and RV. I? had a look at your explanations and picture and it looks like quite a simple DIY project. The disposal of urine is the main

Again you sent me those same drawings that I have , and you already sent them once or twice before , and I told you so a year ago when this saga started . One is not the rudder case drawing (?) .

Hi Ron, On the subject of toilets it is probably incorrect to call the type of toilet I have a 'composting toilet'. It seems that all sorts of alternative toilet systems get lumped under the name

Hi Scott Thanks for trying to help. But I believe Zee means something different. Thanks anyway. Bernd

Zee I mentioned the email problem. I can not say more as I did not received all your emails. I was searching, but I do not have them. The rudder housing I have to send you as mentioned. Sorry about

All I ever wanted is complete plans , I dont know any other way to explain that to you after trying hard for more than a year . Just send me the rudder case drawing that I did not get with the plans