开云体育

Al just ran 100W through it for 2 minutes and "shot" the temperature...no heating or arcing. Jack, W8TEE

All: Conditions were not ideal, but we did get some RBN reports. While it's far too soon to say much, it appears the mag loop gives up about 1-2dB over the EFHW, which is up about 60' or so. VE8JY in

I have a similar loop on my mantlepiece right now. It's not made of rigid copper, and isn't a multi-turn loop. It's about a 3.5 foot loop of plastic pipe strap, with 1/2" wide conductive-adhesive

What is RL on 40m and 20m for the loop ? 73 Kees K5BCQ

Luggable is right. Is the coupling coil both rotatable and positional ? Is there any switching between 1 turn and 2 turns ? Don't see any advantage of parallel windings except a little less resistance

All: Today we began testing Al's new mag loop (ML) design, shown here: It's a 40-30-20M "luggable" loop. It's about 3' in diameter, breaks down so it fits in a car, and we can get almost 1.1:1.0 on

Al (AC8GY) has a drone with a claw drop on it and it was pretty easy to put the EFHW up...he literally dropped the weight through a 3' circle from 100'! Right now, the forecast is pretty much rain for

I kinda miss the old arena, but I doubt that it will ever be rebuilt. Jack, W8TEE

Having been to Hara Arena a number of times in the early 2000's I was amazed to see the damage tornadoes can bring. I never knew Dayton was in the 'danger' area.? WE don't get many Tornadoes in VK,

Having been to Hara Arena five times in the early 2000's it was quite a shock to see the damage there.

Vince, I'm just seeing this. If not too late I would like to be added to the list for a populated board. 73 digger AB3XU

All: Well, once again I got nailed by the storm that hit Dayton (I'm about 50 miles south). This is the third time in as many years that I've lost my antenna. The culprit: a limb from a big old

Brian, Contact me off group @ vince320at gmaildotcom Vince

For those that were interested, I have a list of names and most call signs. Please contact me off line at my qrz email address for details as I will need addresses etc. thanks Vince n2aie

Paul, you are on the list Vince

That was corrected a while back, but our web site is down because it was hacked. Al's going to tear it down and start from scratch this week. Our ISP has been virtually no help at all. Jack, W8TEE

Jack, FYI, In the BOM at the end of the manual, the 5v 1.5A voltage regulator is labeled LM7812CT/NOPB-ND (Digikey) the number is for a 12v 1A regulator. The actual part is LM7805CV TO-220 which is a

Doug pointed out that I have the wrong encoder number in the BOM for the Morse Code Tutor presented at FDIM. You definitely want the switch and the PEC11R-4020K-S0024 should do fine. Jack, W8TEE

Vince, Not sure if my first e-mail went through. I would like one of the populated boards. Thanks for offering. Please let me know what the cost will be. Thanks, 73’s Paul KD9JYV Sent from Mail for

Vince, Pease add Paul, KD9JYV to the list. I would like a populated board. TNX, 73’s Paul KD9JYV Sent from Mail for Windows 10