开云体育

Vince: On page 3 of the download file that has instructions for installing the IDE, it says to put the source code in a directory named: C://JackAlSourceCode/JackAl_Ver0.9a75 and create a subdirectory

John maybe we cal talk about this??

I'm checking into it now. Jack

I've loaded the 0.94 version and like the way Jack moved the Touch calibration to the Calibration screen - logical! However, for some reason neither of my encoders are working now. *I've "ohmed out"

I just tonight reached out to Jack and he said that it is supported under the latest.? If you have any problems reach out for help. John KH6JTE

You can use either one, as I have tested both. It's difficult to keep all of the DOC files up-to-date because we have no control of when or how often they update the IDE. However, we do test the

About a week ago Jack advised us to use Arduino IDE v. 1.87.? I now see where other users have installed v. 1.88.? I’m assuming the latest version is good to go? ? 73,? Guy WB7SZI

Have you installed the Teensyduino software? If you have, you should see the content of Figure 4 in the Installing the Arduino IDE document from the hamradiodesigns.com download. It doesn't appear

Vince I am helping Jack with compiling problems so he can concentrate on other things.? A couple of questions for you. 1.? What OS are you using?2.? What version of Arduino IDE are you using.3.?

All: We have changed the way the display calibration code works. Now you press the ALS encoder switch to end the routine rather than a power down. Also, please note that when you run the display

should have added this little tidbit. \\ Sketch uses 21552 bytes (2%) of program storage space. Maximum is 1048576 bytes. Global variables use 7208 bytes (2%) of dynamic memory, leaving 254936 bytes

Jack, Seems like I had some success..please take a look...there is only one more thing to address (at the end) wondering why the Teensy is not being recognized..(not my first 'arduino board')?

Whoosh? :) [email protected]> wrote: -- “si vis pacem, para bellum”

We're going tomorrow to a local fabricator. It will read: ???????? ?BITX + JackAl = on the back of the shirt. We will probably do polo shirts so they have a collar. We have no idea how much

You should make JackAI & uBTIX shirts...... I would buy one N2NOL [email protected]> wrote:

That should clear up the warnings at least! Jack, W8TEE

Jack, Thanks for the heads up.. so it seems that the Teensy's libs we installed with the TeensyduinoInstall.exe..you are right i put all of them in the Arduino libraries subdir.? so the linker is

I think we will have shirts on that mention JackAl, plus Al and I look like this: I'm the one who thought a good way to lose some weight is to take a dime-sized hunk out of my chin while shaving.

I think the "red" errors are because you didn't use the versions of the Open Audio library that's on hamradiodesigns.com. Download/install that library. You MUST close and reload the IDE anytime you

Jack First I finally got your AA working with the latest and greatest software.? Had hardware issues but got them solved.? I really like it so far. Second in an effort to help you if you want it I