开云体育

Sure. You should also cc Al (AC8GY) as he's the EE genius behind things. Jack, W8TEE

No news yet, but I did put a few hours into it today to get an initial clean install of the arduino IDE and trying a couple of changes. Jack if you don't mind, can I email you with a few questions

From a message written by Jack 4/28/2019 regarding screen protection for the JackAl. Rick KN4AIE _____ Sent: Tuesday, May 26, 2020 6:05 PM To: [email protected] Subject: Re: [JackAl] protection

Is there a schematic? wrote:

I had the same experience with the 7” screen.

so far, one makes it.

Thanks, Jason! The help is appreciated, both by me and Joe. Jack, W8TEE

Negative, using the 5" resistive touch pad per the JackAl instructions. I too suspect a library is off - if anyone has a list of the libraries? and teensy 3.6 software version that were proven to

Jack, that is totally understandable. I'm finishing up (hopefully) installing the hardware into the case and I'll try to dig into some of the earlier versions of the teensyloader and libraries to see

are u sing a 3.6 and do you have all the proper libraries installed . it sounds like a library is off

My problem is that my JackAl is in FL as I loaned it to a guy who was supposed to come back in mid-May,? and he's still down there and is not sure if he want to go home to MI given that he says the

I was using the 8875 library from the JackAl group site when I encountered the problem. It yields a clean compile but the system did not behave properly as previously described. Joe AF4XS

I may have pulled the wrong file. I took this one from the JackAl group site. Jack, W8TEE

where can one get the touchscreen protection board

The fatal error I got was one of the same:?'class RA8875' has no member named 'touched'. Also seem to recall that using the 8875 library off the group files fixes this (that is the one we just took

Copied error from the IDE window and added here for comparison. I removed dup libraries just to clean up the error messages using the libraries called out by the JackAl docs. Jack, is library that

Try this one - it is a zipped pdf.

I can't open the file. Jack, W8TEE

In my case this now generates a compile error - logs attached. Joe

Copy your current RA8875 library out of the Teensy's library directory and put the attached new library in its place. See if that makes a difference. Jack, W8TEE