开云体育

Sorry, butchered part of last message so... I’ll chime in here and mention that there is some configuration of the IDE software that may be required if you haven’t connected to the teensy. The

Art, All USB Micro cables are not created equal. It looks as if you are using one that was designed for charging a cell phone or something. They only have the 5volt and ground connections hooked up

Jim Thanks for the detailed reply. I am at a point of trying to load a sketch via IDE and the teensy loader with no luck. I was loading the blink program. There doesn’t seem to be a port opened

Art, I didn't see a definitive answer yet and I know Jack is super busy trying to sort out everyone's problems so I'll answer your question.? The pad in question is shown on the back side of the

So true. Got involved with this because if I didn't have something new to learn I'd probably be looking for a supply of drugs or something.Jack, et Al, could have supplied their board with an already

It's hard for all of us... Jack, W8TEE

I’m with ya Ron, I bought one for that very reason. On the other hand, when I worked for a living we would bring new equipment on line with known good code to test basic functionality if we had

Thanks Jack, I understand for sure.... But if you guys charged 10 bucks a letter for the splash screen changes...? Cheers, Scott Make something good happen!

Personally I like beating my head against a wall ( really )... it gives me satisfaction when it finally runs.? Says the guy who has spent two days trying to get CQRlog 3.2.0 to run on Ubuntu 8.10

The speaker connection, surprisingly, goes to a speaker! Actually, you have two choices for speaker connections. One is the original audio output from the ?BITX and the other is from the (6W) JackAl

Scott: I understand the request, but really don't want to open that can of worms, because there are an equal number of people who don't know how to load a hex file. Also, everyone needs to change the

The other reason, is you really need to know how to do it. You buy a processor board. You're going to wire it, load it with it's tasks, why not be able to change the stuff that don't suit you, like

That's OK I no code ._._._

For 1 thing, not everyone wants one of their built in cw message to be; "cq de w8tee"?RonW0QVJ Sent from my Galaxy Tab? E

Ok, I'm going to show my ignorance. Why can't the code be compiled once and the resulting machine code be distributed instead of everyone having to compile their own code? Roy WA0YMH

Jack I vaguely recall some discussion about cutting the 5 volt pad on the teensy. Is this still necessary or am I off target. Art N2AJO

In the manual there is a picture of the SPEAKER ?connection on the JackAL board. What is that connected to?? ? The diagram schematic show the speaker jack is connected to the uBitx PCB Audio

Rick: You can leave the #define's for Al and I untouched, as they will not affect your calibration. We did that because we exchanged code on a regular basis, but the calibration numbers where

Hi Jack, While looking at the JackAL.h file to check the download library links I noticed line 6, #define Jack //Jack's 5" inch display, was commented out. Line 4, #define DEBUG was not commented