开云体育

Hello, I’m thinking about M0YYT’s project ?bitx: i want to do it from 0 to 100% https://ubitx.net/2018/07/02/homebrew-ubitx-with-through-hole-components I have a couple of questions and

Nice work! Gary, KD8GQM

Looks very nice! Jack, W8TEE

Hi, This project started out as an attempt to create a template for a front panel for a 5" screen in the "classic" 250x190x110 case that I selected for to house my radio. Easier reprinting then

Thanks, Mark...we feel the same!!? :>) Jack, W8TEE

Jack and Al, Thank you very much for the confirmation! And yet another person that wished the ARRL would publish your book faster! Very much looking forward to it. 73 Mark AJ6CU

All: I just got this from Al: =========== Jack, The extra header are not used on JackAlAl ================= Al: This is part of the JackAl discussion...?? ? Jack ? ----- Forwarded

And this is the message id /g/JackAl/topic/29540974#553 Note that the pdf had headers on top of the audio shield. Neither Jack's description in the above message or details in the

Gary Found this in the archives. ?Seems to indicate that should add those extra headers. ?Still don't believe they are needed,

Gary, I looked on the circuit board trace diagram on page 35 and 36 of Section 2 of the assembly manual and I believe that you are correct on the two parallel inside headers. However, it looks like

I know nothing for sure but my assumption was that those (interior plugs) were left over from Jack & Al's testing.? I could find nothing in the manual that anything hooks to them so my plan was to

Gary, Thanks! I think I will explore your path. Sounds like I have one less part than my approach. Did you figure out the "interior" plugs on the Teensy (that was my question 2). The VUSB pin (that

Sounds like i'm at about the same point as you.? I just went thru the pre-testing list and am now at the point of mounting the teensy. Not sure about "best" but I planned mine a little different.

Hi, Finally getting around to this one on my workbench... Two Questions on Teensy mounting and audio shield 1. is this the best socket approach.? (see photo below). Starting at the top, a. Audio

I have just built v 5 received last Fall and when in CW mode using hand key my side tone tells me I am sending code as expected but when monitoring with another recover all I hear is a continuous

having used the IDE for a few years here is what I do to manage library files etc for a WINDOWS system 1. In MyDocuments there should be an Arduino folder - if not make it 2. In that folder there

Thanks, Doug. I just ordered 3 rolls (free shipping!) as this is the best solder I've ever used. Jack, W8TEE

for the most part it is the same but the raduino has 2 extra pins out from the board to the main board . I would do the testing but as I have been unable to precure the board from qrpguys? who I no

Thanks for the offer Jack.? I have several of your boards and will test out when I get the uBitx v6.? If it hasn't been reported on by then, I'll be happy to do a quick review. George N2APB

REVISED again with a detailed description of the design from Farhan it would appear that all the pins are the same - just with 2 more added to the row for the PTT and Keyer which means JackAl should