Jack
checked the wiring according to what i understand the diagram
says.? checks ok
do you have the magic decoder ring that will tell you what each
wire does?? may i be entrusted with that information.
dave k7da
On 4/22/2019 5:49 AM, jjpurdum via
Groups.Io wrote:
Different lines are used for the touch screen. This allows
you to use the display w/wo touch. Check your wiring to the
display. I'll pass this to Al to see if he has any ideas.
Jack, W8TEE
On Monday, April 22, 2019, 12:49:39 AM EDT, k7da
<k7da@...>
wrote:
Jack
does the touchscreen use the same data path as the
viewing screen?? i
ask because i get no response when trying to do the
calibration
routine.? is it possible to see the data somewhere in
the radio?
the calibration prints yellow lettering and a very
small dot in the
upper left corner but does nothing when pressing the
screen for a
while.? (10 seconds)
what is necessary to get the print routine to print?
? debug was defined
in the jackal.h and the serial monitor in the
compiler turned on but
there is no data printed.? i would think that with
debug defined i
should get something on the monitor as soon as the
radio reboots after
loading the program
