Re: two questions
|
Al and I are working on a new draft of the manual, since we had to build a couple of new rigs to test V5 of the uBITX. In the meantime, take your time and follow the manual, as what you need is there...just not as well written as we'd like. Jack, W8TEE
On Sunday, March 17, 2019, 9:56:14 PM EDT, k7da <k7da@...> wrote:
jack my apologies.? this 76 yr old mind is not firing on all the cylinders anymore. i was sitting here awhile ago and duh why did i ask that
question.? and i did find the two schematics that have the voltages just before i got your email. oh well i just keep trying.? not much else i can do. thanks dave k7da
On 3/17/2019 6:42 PM, jjpurdum via
Groups.Io wrote:
The software is the JackAl software that is downloaded from
the hamradiodesigns.com web site. As to the voltages, we
assume that the rig is powered by 12V-13.8V from a suitable
power supply. If you are building the JackAl and just getting
started, you should apply voltage to the system and the JackAl
board and check the output of the 5V and 3.3V regulators before
you put the Teensy in place. Al has put voltages at
various places on the schematic. If you have specific
questions about those, check will Al as he knows the circuits
forwards and backwards.
Jack, W8TEE
On Sunday, March 17, 2019, 6:42:56 PM EDT, k7da
<k7da@...> wrote:
1. what software goes in the teensy.
2. is there a drawing that shows voltages to
check when starting up?
thanks
dave k7da
|
jjpurdum