Re: Touch Display...was Built but not yet working
|
Pete: As we speak, we are redoing the calibrate instructions. We originally had you "walk around the display" as you did, then write down the coordinate values, and then write them to EEPROM. That was a quikc-and-dirty we did early in the development phase. We are now rewriting that code so you don't have to record/write it to EEPROM. That should be posted by tomorrow. I'll send out a notice when the software and a doc file are ready. Jack, W8TEE
On Monday, January 28, 2019, 11:26:17 AM EST, PeteWK8S via Groups.Io <pmeier@...> wrote:
I finally got the Touch calibrate routine to run but it never ends! ?It¡¯ll go around about 10 times then give ¡°Point Ignored¡± at random spots and continues forever. Never exits. if I power down it just return to calibrate routine. Please advise Pete WK8S
Pete Meier pmeier at Amateur Radio Callsign: WK8S || I never lose. If I don't win, I learn. -?unknown author || |
jjpurdum