Re: Arduino IDE version 1.8.8 issues
|
Dave
You could put a drop of solder across the two pads then use a usb cable to power the teensy. That¡¯s what I did and will remove the solder blob once I begin the physical.build
Art
toggle quoted message
Show quoted text
On Jan 21, 2019, at 6:54 PM, David Berkompas < david.berkompas@...> wrote: I cut the trace on the back of the Teensy, and use one of these when testing:
(Provides either 3.5v or 5v from a wall-wart)
This particular one is out of stock, but I'm sure there's other vendors with similar products.
Jim, thanks for all your valuable input, it is very much appreciated.
Dave - AI6K
|
