Keyboard Shortcuts
Likes
- J-Say
- Messages
Search
|
Re: The Amazing Disappearing Profile
开云体育Thank you forgiving me the proper shutdown command, I thought that the shutdown command I listed had been the right one.for the remaining 2 I don’t actually press the buttons on the keyboard, I just dictate those commands verbatim, as I wrote them. I figured Windows was already turning Dragon off 1st. Until the last week or so I haven’t had any trouble with this. ? What do you need for me to set up a session on Wednesday? Feel free to contact me off-line as needed. ? Keith Heltsley ? ? From: [email protected] <[email protected]> On Behalf Of Brian Hartgen via groups.io
Sent: Tuesday, November 19, 2024 6:20 PM To: [email protected] Subject: Re: [J-Say] The Amazing Disappearing Profile ? Wednesday I could do if you would like that. ? The correct voice command is, Computer Off. That saves the profile first and then closes down the computer. ? If you do use the keyboard to close the computer, Dragon, must, must be closed down first. This can be done by focusing upon the Dragon Bar, pressing ALT+F4 to close Dragon, and then it is safe to restart the computer using one of your below methods. ? Brian Hartgen Hartgen Consultancy. Our usual opening Hours are 9 AM to 5 PM UK time, Monday to Friday. ? Telephone (in the UK) 02921-051325. Telephone (in the United States of America) 239-256-7779. ? From: [email protected] <[email protected]> On Behalf Of retro.otr via groups.io ? I do have Remote Incident Manager. ? That timeslot may be a tight squeeze for me. I’ll probably be pretty busy on Tuesday, but I could probably clear out space on Wednesday of next week. You are correct, I believe my version of Dragon is 15. I may have either heard it wrong, or written it down wrong. ? I’m pretty diligent about shoving down my computer using one of the following methods: ? 1. Shut down (or restart) my computer. 2. Press Windows x. Followed by you, you to shut down. Or followed by you, are for restart. 3. Press alt F4. Then arrowing to the desired selection, either shut down or restart. ? Only in extremely rare instances do I ever press and hold the power key. ? Thanks ? Keith Heltsley ? ? ? ? From: [email protected] <[email protected]> On Behalf Of Brian Hartgen via groups.io ? Dear Mr Heltsley ? Thank you for your message. ? It seems difficult to believe that the profile is being removed from the computer unless you are not closing down the computer properly in line with the instructions given in the J-Say User Guide, or unless there is something on the computer which is removing it, such as MalwareBytes or some other nonsense like that. ? If you have Remote Incident Manager installed, I would be very pleased to help you with this. I do not have any appointments this week left, but I do have Monday at 9 AM US Eastern. If you do not have Remote Incident Manager installed, let me know, and I also need a phone number to call. ? There is no Dragon 19, so it is likely to be 15 or 16. ? Brian Hartgen Hartgen Consultancy. Our usual opening Hours are 9 AM to 5 PM UK time, Monday to Friday. ? Telephone (in the UK) 02921-051325. Telephone (in the United States of America) 239-256-7779. ? From: [email protected] <[email protected]> On Behalf Of retro.otr via groups.io ? ? For several days now, every time I boot up my computer Dragon has me build a new user profile. The process isn’t difficult, just annoying that I have to do it every time I reboot my computer. ? One thing I’ve noticed is that once Dragon is up, running and taking dictation, when I check the profile menu, there are no profiles at all. The only options are new, manage or open. Both the manage in the open option indicate there are no profiles listed, and the only thing I can actually do is hit the button to create a new one. I don’t know what’s happening with the active profile that I am currently using, but it never appears in the list box. ? What am I missing in establishing a new profile and getting it to stick? ? I’m pretty sure my software set up is as follows: ? Dragon 19. J-Sa 22 Jaws 2024 ? thanks for any help, or help resources you can point me towards. ? Keith Heltsley ? ? ? |
|
Re: The Amazing Disappearing Profile
开云体育Wednesday I could do if you would like that. ? The correct voice command is, Computer Off. That saves the profile first and then closes down the computer. ? If you do use the keyboard to close the computer, Dragon, must, must be closed down first. This can be done by focusing upon the Dragon Bar, pressing ALT+F4 to close Dragon, and then it is safe to restart the computer using one of your below methods. ? Brian Hartgen Hartgen Consultancy. Our usual opening Hours are 9 AM to 5 PM UK time, Monday to Friday. ? Telephone (in the UK) 02921-051325. Telephone (in the United States of America) 239-256-7779. ? From: [email protected] <[email protected]> On Behalf Of retro.otr via groups.io
Sent: 19 November 2024 23:31 To: [email protected] Subject: Re: [J-Say] The Amazing Disappearing Profile ? I do have Remote Incident Manager. ? That timeslot may be a tight squeeze for me. I’ll probably be pretty busy on Tuesday, but I could probably clear out space on Wednesday of next week. You are correct, I believe my version of Dragon is 15. I may have either heard it wrong, or written it down wrong. ? I’m pretty diligent about shoving down my computer using one of the following methods: ? 1. Shut down (or restart) my computer. 2. Press Windows x. Followed by you, you to shut down. Or followed by you, are for restart. 3. Press alt F4. Then arrowing to the desired selection, either shut down or restart. ? Only in extremely rare instances do I ever press and hold the power key. ? Thanks ? Keith Heltsley ? ? ? ? From: [email protected] <[email protected]> On Behalf Of Brian Hartgen via groups.io ? Dear Mr Heltsley ? Thank you for your message. ? It seems difficult to believe that the profile is being removed from the computer unless you are not closing down the computer properly in line with the instructions given in the J-Say User Guide, or unless there is something on the computer which is removing it, such as MalwareBytes or some other nonsense like that. ? If you have Remote Incident Manager installed, I would be very pleased to help you with this. I do not have any appointments this week left, but I do have Monday at 9 AM US Eastern. If you do not have Remote Incident Manager installed, let me know, and I also need a phone number to call. ? There is no Dragon 19, so it is likely to be 15 or 16. ? Brian Hartgen Hartgen Consultancy. Our usual opening Hours are 9 AM to 5 PM UK time, Monday to Friday. ? Telephone (in the UK) 02921-051325. Telephone (in the United States of America) 239-256-7779. ? From: [email protected] <[email protected]> On Behalf Of retro.otr via groups.io ? ? For several days now, every time I boot up my computer Dragon has me build a new user profile. The process isn’t difficult, just annoying that I have to do it every time I reboot my computer. ? One thing I’ve noticed is that once Dragon is up, running and taking dictation, when I check the profile menu, there are no profiles at all. The only options are new, manage or open. Both the manage in the open option indicate there are no profiles listed, and the only thing I can actually do is hit the button to create a new one. I don’t know what’s happening with the active profile that I am currently using, but it never appears in the list box. ? What am I missing in establishing a new profile and getting it to stick? ? I’m pretty sure my software set up is as follows: ? Dragon 19. J-Sa 22 Jaws 2024 ? thanks for any help, or help resources you can point me towards. ? Keith Heltsley ? ? ? |
|
Re: The Amazing Disappearing Profile
开云体育I do have Remote Incident Manager. ? That timeslot may be a tight squeeze for me. I’ll probably be pretty busy on Tuesday, but I could probably clear out space on Wednesday of next week. You are correct, I believe my version of Dragon is 15. I may have either heard it wrong, or written it down wrong. ? I’m pretty diligent about shoving down my computer using one of the following methods: ? 1. Shut down (or restart) my computer. 2. Press Windows x. Followed by you, you to shut down. Or followed by you, are for restart. 3. Press alt F4. Then arrowing to the desired selection, either shut down or restart. ? Only in extremely rare instances do I ever press and hold the power key. ? Thanks ? Keith Heltsley ? ? ? ? From: [email protected] <[email protected]> On Behalf Of Brian Hartgen via groups.io
Sent: Tuesday, November 19, 2024 4:56 PM To: [email protected] Subject: Re: [J-Say] The Amazing Disappearing Profile ? Dear Mr Heltsley ? Thank you for your message. ? It seems difficult to believe that the profile is being removed from the computer unless you are not closing down the computer properly in line with the instructions given in the J-Say User Guide, or unless there is something on the computer which is removing it, such as MalwareBytes or some other nonsense like that. ? If you have Remote Incident Manager installed, I would be very pleased to help you with this. I do not have any appointments this week left, but I do have Monday at 9 AM US Eastern. If you do not have Remote Incident Manager installed, let me know, and I also need a phone number to call. ? There is no Dragon 19, so it is likely to be 15 or 16. ? Brian Hartgen Hartgen Consultancy. Our usual opening Hours are 9 AM to 5 PM UK time, Monday to Friday. ? Telephone (in the UK) 02921-051325. Telephone (in the United States of America) 239-256-7779. ? From: [email protected] <[email protected]> On Behalf Of retro.otr via groups.io ? ? For several days now, every time I boot up my computer Dragon has me build a new user profile. The process isn’t difficult, just annoying that I have to do it every time I reboot my computer. ? One thing I’ve noticed is that once Dragon is up, running and taking dictation, when I check the profile menu, there are no profiles at all. The only options are new, manage or open. Both the manage in the open option indicate there are no profiles listed, and the only thing I can actually do is hit the button to create a new one. I don’t know what’s happening with the active profile that I am currently using, but it never appears in the list box. ? What am I missing in establishing a new profile and getting it to stick? ? I’m pretty sure my software set up is as follows: ? Dragon 19. J-Sa 22 Jaws 2024 ? thanks for any help, or help resources you can point me towards. ? Keith Heltsley ? ? ? |
|
Re: The Amazing Disappearing Profile
开云体育Dear Mr Heltsley ? Thank you for your message. ? It seems difficult to believe that the profile is being removed from the computer unless you are not closing down the computer properly in line with the instructions given in the J-Say User Guide, or unless there is something on the computer which is removing it, such as MalwareBytes or some other nonsense like that. ? If you have Remote Incident Manager installed, I would be very pleased to help you with this. I do not have any appointments this week left, but I do have Monday at 9 AM US Eastern. If you do not have Remote Incident Manager installed, let me know, and I also need a phone number to call. ? There is no Dragon 19, so it is likely to be 15 or 16. ? Brian Hartgen Hartgen Consultancy. Our usual opening Hours are 9 AM to 5 PM UK time, Monday to Friday. ? Telephone (in the UK) 02921-051325. Telephone (in the United States of America) 239-256-7779. ? From: [email protected] <[email protected]> On Behalf Of retro.otr via groups.io
Sent: 19 November 2024 22:40 To: [email protected] Subject: [J-Say] The Amazing Disappearing Profile ? ? For several days now, every time I boot up my computer Dragon has me build a new user profile. The process isn’t difficult, just annoying that I have to do it every time I reboot my computer. ? One thing I’ve noticed is that once Dragon is up, running and taking dictation, when I check the profile menu, there are no profiles at all. The only options are new, manage or open. Both the manage in the open option indicate there are no profiles listed, and the only thing I can actually do is hit the button to create a new one. I don’t know what’s happening with the active profile that I am currently using, but it never appears in the list box. ? What am I missing in establishing a new profile and getting it to stick? ? I’m pretty sure my software set up is as follows: ? Dragon 19. J-Sa 22 Jaws 2024 ? thanks for any help, or help resources you can point me towards. ? Keith Heltsley ? ? ? |
|
The Amazing Disappearing Profile
开云体育? For several days now, every time I boot up my computer Dragon has me build a new user profile. The process isn’t difficult, just annoying that I have to do it every time I reboot my computer. ? One thing I’ve noticed is that once Dragon is up, running and taking dictation, when I check the profile menu, there are no profiles at all. The only options are new, manage or open. Both the manage in the open option indicate there are no profiles listed, and the only thing I can actually do is hit the button to create a new one. I don’t know what’s happening with the active profile that I am currently using, but it never appears in the list box. ? What am I missing in establishing a new profile and getting it to stick? ? I’m pretty sure my software set up is as follows: ? Dragon 19. J-Sa 22 Jaws 2024 ? thanks for any help, or help resources you can point me towards. ? Keith Heltsley ? ? ? |
|
J-Say 23 Update
开云体育J-Say 23 has been updated. Corrected a problem where with latest builds of Windows11, it was not possible to create shortcuts to files and folders. If you do not create such shortcuts, there is no need to update. The link is exactly the same as it was before. If you have purchased J-Say 23, you should have that. You can just install over the top of the existing version. ? Brian Hartgen Hartgen Consultancy. Our usual opening Hours are 9 AM to 5 PM UK time, Monday to Friday. ? Telephone (in the UK) 02921-051325. Telephone (in the United States of America) 239-256-7779. ? |
|
J-Say Shortcuts
开云体育A problem has been identified today in relation to creating J-Say shortcuts pointing to files and folders. These allow for frequently used files and folders to be launched directly by voice. They are no longer functioning in recent builds of Windows11. Existing shortcuts will function but creating new ones is not possible. This will be fixed by 21 November for users of J-Say version 23. This will mean that those people using J-Say 22 will not be able to create new shortcuts. An update to J-Say 23 will be made available by 21 November. ? Brian Hartgen Hartgen Consultancy. Our usual opening Hours are 9 AM to 5 PM UK time, Monday to Friday. ? Telephone (in the UK) 02921-051325. Telephone (in the United States of America) 239-256-7779. ? |
|
Hartgen Consultancy Holiday Dates
开云体育Reminder: Hartgen Consultancy closing dates are as follows: Monday 11 November through to Monday 18 November. That is next week. ? Friday 20 December 2024 through to Monday 6 January 2025. ? During these dates, urgent technical support queries, together with sales orders, will be processed by Email only. This is exactly the same procedure as previous years. ? Brian Hartgen Hartgen Consultancy. Our usual opening Hours are 9 AM to 5 PM UK time, Monday to Friday. ? Telephone (in the UK) 02921-051325. Telephone (in the United States of America) 239-256-7779. ? |
|
J-Say version 23
开云体育Today, JAWS version 2025 has been released. All our products are compatible with JAWS 2025, even J-Say, the update for which has just been released. So targets have been met and in some cases exceeded. ? Within the next few days, we will be contacting people who have a J-Say SMA and providing them with their upgrades. However, the vast majority of people who have J-Say have acquired it through a Distributor. So in most cases, it is the Distributor who would let you know that the upgrade is available. ? If you think you do have a current SMA, your best course of action is to send to us your JAWS serial number so it can be checked. We may then be able to provide it to you faster. ? Brian Hartgen Hartgen Consultancy. Our usual opening Hours are 9 AM to 5 PM UK time, Monday to Friday. ? Telephone (in the UK) 02921-051325. Telephone (in the United States of America) 239-256-7779. ? |
|
AI Tools
开云体育Some people have been asking about using J-Say with AI tools, so let's bring you up-to-date with that. ? With J-Say version 23, to be released in November, you will be able to: Use the new FSCompanion. It won't help you in terms of learning how to do tasks by voice. There will have to come a time when we have an AI tool for J-Say purposes. But it will teach you concepts and keyboard commands. You can start it by voice and navigate it. You can access it by voice even if JAWS 2025 is not installed. Access Chat GPT directly with a voice command and easily navigate it. Access CoPilot directly with a voice command and easily navigate it. Access CoPilot in Office applications. Because of the way Dragon handles working within the context of CoPilot and Office, this has been far more difficult to handle. JAWS was talking far too much. However, that problem is solved. ? Brian Hartgen Hartgen Consultancy. Our usual opening Hours are 9 AM to 5 PM UK time, Monday to Friday. ? Telephone (in the UK) 02921-051325. Telephone (in the United States of America) 239-256-7779. ? |
|
Re: J-Say with JAWS 2025, Please Read
Thank you very much for that detailed note! It’s a great help! Thanks and regards! On Wed, Oct 16, 2024 at 10:36?PM Brian Hartgen via <brian=[email protected]> wrote:
--
ANNAVARAM Mobile: +91 8374701417 |
|
Re: J-Say with JAWS 2025, Please Read
开云体育Thank you for letting me know.This message was created using dictation. Please ignore any dictation or transcription mistakes. On Oct 16, 2024, at 10:06?AM, Brian Hartgen via groups.io <brian@...> wrote:
|
|
J-Say with JAWS 2025, Please Read
开云体育Hi to all ? We are at the time of year when a new JAWS version is almost upon us. I would say it is about two weeks away at this point. For anyone thinking of upgrading to the new JAWS 2025, I would please like you to read what I have to say very carefully. This will help you plan your access to it via J-Say moving forward. ? We are on target to release a version of J-Say for JAWS 2025 at the start of November. Please do not try to use your existing J-Say 22 with JAWS 2025, tempting though it may be. It will not work. ? Due to various productivity concerns I have had about JAWS 2025, I have not been able to give it the extreme care and attention I would have done in the past. Of course it has been tested particularly with J-Say, but it hasn't been as rigorously tested as in previous years. We are I think over that point now and I will continue to work on it up until release time. ? If you are eligible to receive a J-Say upgrade, you will receive it at the start of November, just after the official release of JAWS 2025. But, particularly if you are completely reliant upon using J-Say, I would not be inclined at this point to rush straight into upgrading. I really wouldn't. ? Of course everything will be ready for you if you do want it, but, be cautious. Particularly for people who need help installing the products, I think we should just take this one a little slower this time. I am on holiday from 11 to 18 November, and in many cases, I am the one who would need to do that install if it was required, so that is something to bare in mind. But in all honesty, my advice is to let things settle awhile before proceeding. ? Further, while there are undoubtedly some bug fixes in this new JAWS release, I cannot say there is anything compelling to upgrade for. Picture Smart was one of the most innovative JAWS features in years. But you already have access to that. ? In summary, you will want to upgrade JAWS and J-Say at some point in the near future. But if you are reliant upon this software because you have no other means of working with the computer, I would say perhaps now is not the time to do it. ? I apologise for the length of this message but I think you need to be very aware of how things are working out. ? ? Brian Hartgen Hartgen Consultancy. Our usual opening Hours are 9 AM to 5 PM UK time, Monday to Friday. ? Telephone (in the UK) 02921-051325. Telephone (in the United States of America) 239-256-7779. ? |
|
Re: J-Say and Leasey
开云体育Hi Caroline ? The answer is exactly the same as it has always been, and that is likely to continue. You would have to use a separate JAWS version, but thanks for checking. ? Brian Hartgen Hartgen Consultancy. Our usual opening Hours are 9 AM to 5 PM UK time, Monday to Friday. ? Telephone (in the UK) 02921-051325. Telephone (in the United States of America) 239-256-7779. ? From: [email protected] <[email protected]> On Behalf Of Caroline toews
Sent: Thursday, August 22, 2024 11:43 PM To: [email protected] Subject: [J-Say] J-Say and Leasey ? Hi everyone. I ask this question every time and the answer is no, but I’m asking again because I can’t remember if there’s been a change since the last time I did an install which was quite some time ago, and I keep thinking that there might have been a change. Do I still have to install J-Say into a separate JAWS version if I’m running Leasey? I’ve been looking for an updated answer all afternoon but the closest I’ve come is in the J-Say installation guide where it states: ? Under most circumstances, it is not necessary to remove any JAWS script files you may have previously installed. However, before installing J-Say, we advise that you check with us to determine whether or not there are likely to be any conflicts with existing scripts. ? I hate asking again, but hope someone can give me the latest info before I install. Thanks in advance! ? Caroline ? ? |
|
J-Say and Leasey
开云体育Hi everyone. I ask this question every time and the answer is no, but I’m asking again because I can’t remember if there’s been a change since the last time I did an install which was quite some time ago, and I keep thinking that there might have been a change. Do I still have to install J-Say into a separate JAWS version if I’m running Leasey? I’ve been looking for an updated answer all afternoon but the closest I’ve come is in the J-Say installation guide where it states: ? Under most circumstances, it is not necessary to remove any JAWS script files you may have previously installed. However, before installing J-Say, we advise that you check with us to determine whether or not there are likely to be any conflicts with existing scripts. ? I hate asking again, but hope someone can give me the latest info before I install. Thanks in advance! ? Caroline ? ? |
|
Re: J-Say command to invoke the JAWS Task List
There is mixed news with this one.
1. The command, Select a Program, as I've said previously brings up the Microsoft list of running programs. One can move through this list with, Move Down, etc, then Confirm That to focus the program.
That has served us well for many years and I do not see an issue with this. 2. However, now that the Insert F10 jaws list was redesigned in the last year, particularly so as to close programs, I tested this with Dragon. I accept people cannot do this at the moment. I am glad to say this list does no longer have the problems it once did.
So I am more than happy to restore that functionality so people have access to that list instead. |
|
Re: J-Say command to invoke the JAWS Task List
开云体育Sometimes you can say press insert, and then a key stroke combination. This does not always work. But sometimes it does.This message was created using dictation. Please ignore any dictation or transcription mistakes. On Jul 26, 2024, at 12:59?PM, Dean Martineau via groups.io <topdot@...> wrote:
|
|
Re: J-Say command to invoke the JAWS Task List
开云体育There is, Select a Program. That brings up a list of running programs. Now that is not quite the same as insert F10, because the last time I checked, there were some compatibility issues between that list and Dragon. I will check it next week. ? ? Brian Hartgen Hartgen Consultancy. Our usual opening Hours are 9 AM to 5 PM UK time, Monday to Friday. ? Telephone (in the UK) 02921-051325. Telephone (in the United States of America) 239-256-7779. ? From: [email protected] <[email protected]> On Behalf Of Dean Martineau
Sent: Friday, July 26, 2024 8:49 PM To: [email protected] Subject: Re: [J-Say] J-Say command to invoke the JAWS Task List ? I have occasionally used, and I’m pretty sure I’ve taught, the System Tray command. That isn’t at all what I was hoping to find. I was hoping there would be a command to bring up the JAWS Task List, insert+F10. ? ? Encouraging and thought-provoking reading https://bahaiteachings.org ? From: [email protected] <[email protected]> On Behalf Of Joshua Saunders via groups.io ? This is Josh. I have used this command. Admittedly it was probably about six months ago. What it did was it brought up the system tray. Therefore it makes sense. This message was created using dictation. Please ignore any dictation or transcription mistakes.
|
|
Re: J-Say command to invoke the JAWS Task List
开云体育No you cannot say press Insert F11. That is one of the reasons J-Say exists. ? ? Brian Hartgen Hartgen Consultancy. Our usual opening Hours are 9 AM to 5 PM UK time, Monday to Friday. ? Telephone (in the UK) 02921-051325. Telephone (in the United States of America) 239-256-7779. ? From: [email protected] <[email protected]> On Behalf Of Dean Martineau
Sent: Friday, July 26, 2024 8:59 PM To: [email protected] Subject: Re: [J-Say] J-Say command to invoke the JAWS Task List ? Well, in my experience, and I just tried it, J-Say/Dragon does not act on insert key combinations. Of course you can use all sorts of other keystrokes. I am using an older version of the program, in case that matters. ? Encouraging and thought-provoking reading https://bahaiteachings.org ? From: [email protected] <[email protected]> On Behalf Of Joshua Saunders via groups.io ? You probably know this, but you can say press insert F10 This message was created using dictation. Please ignore any dictation or transcription mistakes.
|
|
Re: J-Say command to invoke the JAWS Task List
开云体育Well, in my experience, and I just tried it, J-Say/Dragon does not act on insert key combinations. Of course you can use all sorts of other keystrokes. I am using an older version of the program, in case that matters. ? Encouraging and thought-provoking reading https://bahaiteachings.org ? From: [email protected] <[email protected]> On Behalf Of Joshua Saunders via groups.io
Sent: Friday, July 26, 2024 3:51 PM To: [email protected] Subject: Re: [J-Say] J-Say command to invoke the JAWS Task List ? You probably know this, but you can say press insert F10 This message was created using dictation. Please ignore any dictation or transcription mistakes.
|