开云体育

sounds good! You should be able to pop off the 4 rubber feet save them. Remove the bottom shell and … it won’t help the clean wire job. But you could flip/invert it so the “guts are showing”

Kelly, Actually the pic doesn't quite do the color's justice - the illumination around the fan is really nice! The Buck Converter Shelf has Green, Red Leds, The Quadra shelf COULD be lit up more -

Looks nice! it could however use some rgb led has to be a spare gpio in that stack. You could code each level a different color or dance around or indicate mail waiting?! Mine all dangle by cat 5 …

Project Completed!

I’ve been using the Pi too long. I was putting the card in a reader and into the USB drive, not using the card slot. Thanks AE4DW for pointing that out! In my defence, I’m monkeying with this

Well, on a hunch, shut down everything and restarted it all. PTT function is now active in FLDIGI. Now to try it on a live radio. Wheee! -- VY 73. Wes WB7BR

Sorry Dave, did not make? myself clear. I was having trouble with the Configure>Soundcard>Devices PortAudio Capture and Playback selection. The DRA soundcard was not showing up in the dropdown list.

USB drive? I'm assuming you mean you put it in the SD card slot...?

Wes, You're comparing apples and oranges here... Linux <> Win7 and Fldigi <> Winlink Have you tried checking this setting? The DRA requires a special setup in Fldigi: [image: image.png]

Might be Dave, but it works just fine when connected to a Win7 maching running Winlink?VaraHF. Will poll the other groups to see if anyone has ideas. As an idea, I will start FLDIGI on my Win7 machine

This sounds like it might be more of a DRA issue... Have you emailed kuggie@... for support on the DRA?

I have the HamIQ package operating from the uSD card, working fine. But, when I connected a DRA soundcard to the Quadra and started FLDIGI the DRA does not appear in the Soundcard list to choose the

David, How did you flash the card?

I'm obviously missing something.? I flashed the card, put it in the USB drive and booted the Quadra.? I don't see a pi user, or any way to login as anything other than the quadra user.

Yes Dave, Thank You so much! Terry

73 Kees K5BCQ

I just ordered on of these: https://www.amazon.ca/dp/B083FDHPBH?ref_=as_li_ss_tl&language=en_US&linkCode=gg2&linkId=5e84893205f329a2633a6ba7c0e76090&tag=tecr2-20 I plan to tidy up my desktop at last,

Terry, Does this help answer your question about adjusting swappiness? https://askubuntu.com/questions/463281/why-dont-changes-to-the-swappiness-remain-permanent-after-reboot

I'm with you but 'm not sure that you would benefit from that? My understanding of SD Cards as Swap files will be slower than any advantage expected or gained! Thinking about speed increments, I

Hi JIm, Thanks for the information on the FTDI history. I got into Ham Radio around September of 2019 going the cheap Baofeng route. After a couple of months I upgraded to the Yaesu FT-60. I run CHIRP