When I boot Ham-Pi from the sd card, it looks like I have two separate linux boxes available -- the one with Ham-Pi installed and the one with the standard Quadra software installed. Is that right?
I installed RealVNC on the Quadra machine, and that worked well. Then I booted off the Ham-Pi card and my VNC client couldn't find either the Quadra box or the Ham-Pi box. So I guessed that I needed to install RealVNC on the Ham-Pi box, but the install failed. (See attached file.) Can anybody clue me in on what's going on here or what mistake I'm making.
BTW, flashing the Ham-Pi image has been a problem for me. Win32DiskImager goes through the whole process, including a successful validation, in about ten minutes. But the cards don't seem to boot at all. Balena Etcher takes much longer (about 40 minutes including validation),? and then at the very end it says the flash failed . Nonetheless the cards work; i.e., Ham-Pi loads.
In all cases, I have been booting with the video monitor attached.
