开云体育

Gidday Nathan, I am not claiming to be any sort of expert mate, but here is my small contribution. It sounds like something fundamental. I suppose you have checked that there are no bent pins in the

Hi Nathan, most 8920 units use boot v2.02. Some early units have v1.00 , if I remember right. Rick

Odd questions do all 8920B boot up with A.02.02 bootloader version? I've flashed this unit, replaced the bootloader chip, rebuild the power supply, still have non-recoverable error for $header

/g/HP8924-Family-Spectrum-Analyzers/files/1Separate%20miscellaneous%20files/bts_sw.zip The BTS screen dump utility has been in the files section of HP8920/8935 since the group's birth

Hi Bill, The 8 pin modular socket is a dual RS232 serial port. You CAN use this to get a screen dump but not direct to a priner. The is an old HP utility called BTS that runs on a PC and saves the

Worked great, thanks! GeorgeC W2DB

Hi George, ?? Yes you can. After you use it the first time, it will remain in memory. To use it again, with no card installed, press the "Test" button. On the test screen, as long as you don't

Is it possible to xfer the RF tools from the memory card to the internal RAM? This would negate having to insert the card when needing to use these utilities. GeorgeC W2DB

Thanks Chris, yeah that was all I was able to find. Going to crack it open tomorrow to change the eeprom on the downconverter and change batteries. I have 3V lithium solder in ones I use in Motorola

Re battery 8935 battery is totally different to E8285A. No similarities whatsoever. E8285A has 2x batteries - one on the regulator board and another on the memory board. Both are lithium 3V solder in

I have 8935’s too but this is different, no compartment, etc. GC radioman762 wrote: First, I don’t have an E8285 but I do have a 8935 that has similarities. On my unit there’s a holder for AA

I was wrong in my prior post about this problem. Here's what Keysight has to say: Error Message "AA memory backup batteries are low" This message is a firmware carryover from the E6380 that conveys

First, I don’t have an E8285 but I do have a 8935 that has similarities. On my unit there’s a holder for AA cells on the rear of the chassis. ?It sounds like yours has something similar. ?You

Thanks a bunch. I still might have some sort of problem because I stored a bunch of tests last nigh including "poweron" and none exisited this morning. GeorgeC

Hi all- I have a E8285 I'm sending to a friend. I already did the ZL1CVD "downgrade" and getting ready to install his calibration IC. But in setting this up for him I see a message about "AA batteries

Hi William, ?? I just sent you an email from my gmail account. Hopefully, you will get that one. Thanks ! Rick

No Rick, Not a word. I have been expecting your QSO. I was thinking of Fires in USA and dire circumstances you may be in. Glad to hear from you. Maybe My Anti Virus settings are a bit fierce ?! ..

Hi William, ??? I'm still here. I've sent several messages to: westwill1@...???????? Did you get any messages from me? Rick

I guess I have to ask, anyone have a firmware they are willing to lend? I can give you all the details you need.

Thanks Alex,? Would you mention the store or site to search in OZ. Bill M