开云体育

After maintenance, it can't run now. The input signal of ant port is too low to detect. These can only run after calibration. At present, I don't know how to solve them. Do you know,

8920A or B reads/writes either DOS or LIF depending on how the card is initialized (formatted). The card tells the instrument what it is.? File naming may be important for compatibility. It was

I want to thank everyone for the help in getting it running for me - Really appreciate all the help that you guys provided. Here is what I ended up doing (ignoring the faffing around that was also a

How come me my name shouts in the "From" field of this forum when the settings in my Thunderbird only capitalise the the 1st letters of my name and not all of it :-\

That's weird, because the file opened for me in windows 8 with no specialised software app.

Note my reply with zipped attachment was not meant to go to the group and the zip file is incomplete. If a moderator can remove it that would be good. Robert G8RPI.

I have only managed to get the RF TOOLS card to work by copying an image of the card (.BIN file) or by loading into a 8920B and then copying back to a RAM card. As far as I know the 8920B writes to

Actually Robert - Don't worry I tried the software JB pointed me to and it works so I think I'm good on that. My question now is that it seems the process accepts only 1 file to be written to the

I don't seem to be able to unzip it either using a couple of different unzippers. Ralph _._,_._,_ _._,_

Thanks Robert, There seems to be an issue with the zip file though - 7-Zip is reporting: Any ideas? Was this a multi-part archive by any chance? Thanks, TonyG

Hi Tony, See attached. I spent many hours sorting the answer to what card, PC and software worked first time around. Robert G8RPI.

Still trying to figure how to load a 8920A DOS card from those files.? I assume they are DOS files? I can drip a *text* file into it from Hyperterminal via serial 9 into the HPIB cntrl console and

Can you, or someone in the group, provide the Epson cards that the HP 8920A used with RF Tools installed? Or, would it be "better" to upgrade the 8920A to 8920B spec with the PCMCIA card reader?

Thanks, Ralph & Robert, I pulled out my old IBM T20 (haven't used this since the late 90's and only kept it because of the PCMCIA slots and that it would run an old NI GPIB-232 adapter I needed for

Hello, This is taken from the Amtronix web site regarding the mic for the 8924C which I own: ? ? "The HP 8924C has a?Microphone?input connector on the front panel. Original microphones for the

While I don't have mine at hand, and could well be mistaken, it is my recollection that the microphones from some of the vintage Regency transceivers will work with the HP 8924c and likely the 8920 as

You can download the RF Tools in the files section here. /g/HP8924-Family-Spectrum-Analyzers/files/RF%20Tools%20&%20NA%20FM I have loaded it in but just do not find it helpful for my

Hi Tony, The RF tools is useful. The main advantage is the ability to do calibrated sweep measurements. This makes the 8920x a basic scalar network analyser. The only issue is the slow sweep speed.

Hey All, I stumbled across an 8920B at a reasonable price so I bought it for my Dad (he's a big ham guy) - I'm heading back down to Aus in July and will hand it off to him then. I thought however I

Found an 8 pin, 270 degree plug at Mouser for about 4 bucks -- not bad at all for the price. https://www.mouser.com/ProductDetail/CUI-Devices/SDR-60?qs=sGAEpiMZZMvlX3nhDDO4AOwSpGk0QBtILRD52FuJtjc%3D